Drive Data Sheets
m (→HGST HUH728080ALE600) |
(→Western Digital Drives) |
||
(15 intermediate revisions by 2 users not shown) | |||
Line 5: | Line 5: | ||
The data should be the output of "smartctl -x" - for non-raid drives you may need to do "smartctl -s on /dev/sdX" to get the output as cheaper drives forget settings between reboots. | The data should be the output of "smartctl -x" - for non-raid drives you may need to do "smartctl -s on /dev/sdX" to get the output as cheaper drives forget settings between reboots. | ||
− | Drives | + | Drives were classified as "raid" or "non-raid" depending on whether they support SCT/ERC. As of 2020 Western Digital has started using SMR technology in Red drives which, while it would be fine for drives in an array, makes it impossible to actually add the drives to the array. These drives should be classified as non-raid. They have introduced two new lines of drives, the Red Plus, and the Red Pro, which they have explicitly said will remain CMR. These are okay. |
= Hitachi Drives = | = Hitachi Drives = | ||
== Raid drives == | == Raid drives == | ||
+ | === HGST MegaScale 4000 === | ||
+ | ==== HGST HMS5C4040ALE640 (4TB) ==== | ||
+ | <pre> | ||
+ | smartctl 6.4 2015-06-04 r4109 [i686-w64-mingw32-2012r2(64)] (sf-6.4-1) | ||
+ | Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | |||
+ | === START OF INFORMATION SECTION === | ||
+ | Model Family: HGST MegaScale 4000 | ||
+ | Device Model: HGST HMS5C4040ALE640 | ||
+ | Serial Number: PL1331LAG9DZ0I | ||
+ | LU WWN Device Id: 5 000cca 22ec44805 | ||
+ | Firmware Version: MPAOA3W0 | ||
+ | User Capacity: 4,000,787,030,016 bytes [4.00 TB] | ||
+ | Sector Sizes: 512 bytes logical, 4096 bytes physical | ||
+ | Rotation Rate: 5700 rpm | ||
+ | Form Factor: 3.5 inches | ||
+ | Device is: In smartctl database [for details use: -P show] | ||
+ | ATA Version is: ATA8-ACS T13/1699-D revision 4 | ||
+ | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | ||
+ | Local Time is: Tue Apr 23 20:15:43 2019 | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | AAM feature is: Unavailable | ||
+ | APM feature is: Disabled | ||
+ | Rd look-ahead is: Enabled | ||
+ | Write cache is: Enabled | ||
+ | ATA Security is: Disabled, NOT FROZEN [SEC1] | ||
+ | Wt Cache Reorder: Enabled | ||
+ | |||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | |||
+ | General SMART Values: | ||
+ | Offline data collection status: (0x84) Offline data collection activity | ||
+ | was suspended by an interrupting command from host. | ||
+ | Auto Offline Data Collection: Enabled. | ||
+ | Self-test execution status: ( 0) The previous self-test routine completed | ||
+ | without error or no self-test has ever | ||
+ | been run. | ||
+ | Total time to complete Offline | ||
+ | data collection: (44213) seconds. | ||
+ | Offline data collection | ||
+ | capabilities: (0x5b) SMART execute Offline immediate. | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | No Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: (0x0003) Saves SMART data before entering | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: (0x01) Error logging supported. | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 1) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: ( 737) minutes. | ||
+ | SCT capabilities: (0x003d) SCT Status supported. | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | |||
+ | SMART Attributes Data Structure revision number: 16 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | ||
+ | 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 | ||
+ | 2 Throughput_Performance P-S--- 133 133 054 - 104 | ||
+ | 3 Spin_Up_Time POS--- 122 122 024 - 567 (Average 572) | ||
+ | 4 Start_Stop_Count -O--C- 100 100 000 - 25 | ||
+ | 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | ||
+ | 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | ||
+ | 8 Seek_Time_Performance P-S--- 113 113 020 - 42 | ||
+ | 9 Power_On_Hours -O--C- 099 099 000 - 13179 | ||
+ | 10 Spin_Retry_Count PO--C- 100 100 060 - 0 | ||
+ | 12 Power_Cycle_Count -O--CK 100 100 000 - 25 | ||
+ | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 304 | ||
+ | 193 Load_Cycle_Count -O--C- 100 100 000 - 304 | ||
+ | 194 Temperature_Celsius -O---- 153 153 000 - 39 (Min/Max 17/42) | ||
+ | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | ||
+ | 197 Current_Pending_Sector -O---K 100 100 000 - 0 | ||
+ | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | ||
+ | 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | ||
+ | ||||||_ K auto-keep | ||
+ | |||||__ C event count | ||
+ | ||||___ R error rate | ||
+ | |||____ S speed/performance | ||
+ | ||_____ O updated online | ||
+ | |______ P prefailure warning | ||
+ | |||
+ | General Purpose Log Directory Version 1 | ||
+ | SMART Log Directory Version 1 [multi-sector log support] | ||
+ | Address Access R/W Size Description | ||
+ | 0x00 GPL,SL R/O 1 Log Directory | ||
+ | 0x01 SL R/O 1 Summary SMART error log | ||
+ | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log | ||
+ | 0x04 GPL R/O 7 Device Statistics log | ||
+ | 0x06 SL R/O 1 SMART self-test log | ||
+ | 0x07 GPL R/O 1 Extended self-test log | ||
+ | 0x08 GPL R/O 2 Power Conditions log | ||
+ | 0x09 SL R/W 1 Selective self-test log | ||
+ | 0x10 GPL R/O 1 SATA NCQ Queued Error log | ||
+ | 0x11 GPL R/O 1 SATA Phy Event Counters log | ||
+ | 0x20 GPL R/O 1 Streaming performance log [OBS-8] | ||
+ | 0x21 GPL R/O 1 Write stream error log | ||
+ | 0x22 GPL R/O 1 Read stream error log | ||
+ | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log | ||
+ | 0xe0 GPL,SL R/W 1 SCT Command/Status | ||
+ | 0xe1 GPL,SL R/W 1 SCT Data Transfer | ||
+ | |||
+ | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | ||
+ | No Errors Logged | ||
+ | |||
+ | SMART Extended Self-test Log Version: 1 (1 sectors) | ||
+ | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | ||
+ | # 1 Short offline Completed without error 00% 13162 - | ||
+ | # 2 Short offline Completed without error 00% 13090 - | ||
+ | # 3 Short offline Completed without error 00% 12994 - | ||
+ | # 4 Short offline Completed without error 00% 12922 - | ||
+ | # 5 Short offline Completed without error 00% 12826 - | ||
+ | # 6 Short offline Completed without error 00% 12754 - | ||
+ | # 7 Short offline Completed without error 00% 12658 - | ||
+ | # 8 Short offline Completed without error 00% 12586 - | ||
+ | # 9 Short offline Completed without error 00% 12490 - | ||
+ | #10 Short offline Completed without error 00% 12418 - | ||
+ | #11 Short offline Completed without error 00% 12322 - | ||
+ | #12 Short offline Completed without error 00% 12250 - | ||
+ | #13 Short offline Completed without error 00% 12154 - | ||
+ | #14 Short offline Completed without error 00% 12082 - | ||
+ | #15 Short offline Completed without error 00% 11986 - | ||
+ | #16 Short offline Completed without error 00% 11914 - | ||
+ | #17 Short offline Completed without error 00% 11818 - | ||
+ | #18 Short offline Completed without error 00% 11746 - | ||
+ | #19 Short offline Completed without error 00% 11650 - | ||
+ | |||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | |||
+ | SCT Status Version: 3 | ||
+ | SCT Version (vendor specific): 256 (0x0100) | ||
+ | SCT Support Level: 1 | ||
+ | Device State: SMART Off-line Data Collection executing in background (4) | ||
+ | Current Temperature: 39 Celsius | ||
+ | Power Cycle Min/Max Temperature: 29/41 Celsius | ||
+ | Lifetime Min/Max Temperature: 17/42 Celsius | ||
+ | Under/Over Temperature Limit Count: 0/0 | ||
+ | |||
+ | SCT Temperature History Version: 2 | ||
+ | Temperature Sampling Period: 1 minute | ||
+ | Temperature Logging Interval: 1 minute | ||
+ | Min/Max recommended Temperature: 0/60 Celsius | ||
+ | Min/Max Temperature Limit: -40/70 Celsius | ||
+ | Temperature History Size (Index): 128 (127) | ||
+ | |||
+ | Index Estimated Time Temperature Celsius | ||
+ | 127 2019-04-23 20:15 39 ******************** | ||
+ | |||
+ | SCT Error Recovery Control: | ||
+ | Read: Disabled | ||
+ | Write: Disabled | ||
+ | |||
+ | Device Statistics (GP Log 0x04) | ||
+ | Page Offset Size Value Flags Description | ||
+ | 0x01 ===== = = === == General Statistics (rev 1) == | ||
+ | 0x01 0x008 4 25 --- Lifetime Power-On Resets | ||
+ | 0x01 0x010 4 13179 --- Power-on Hours | ||
+ | 0x01 0x018 6 8637111250 --- Logical Sectors Written | ||
+ | 0x01 0x020 6 11774418 --- Number of Write Commands | ||
+ | 0x01 0x028 6 16919571572 --- Logical Sectors Read | ||
+ | 0x01 0x030 6 68467965 --- Number of Read Commands | ||
+ | 0x03 ===== = = === == Rotating Media Statistics (rev 1) == | ||
+ | 0x03 0x008 4 13177 --- Spindle Motor Power-on Hours | ||
+ | 0x03 0x010 4 13177 --- Head Flying Hours | ||
+ | 0x03 0x018 4 304 --- Head Load Events | ||
+ | 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors | ||
+ | 0x03 0x028 4 0 --- Read Recovery Attempts | ||
+ | 0x03 0x030 4 0 --- Number of Mechanical Start Failures | ||
+ | 0x04 ===== = = === == General Errors Statistics (rev 1) == | ||
+ | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | ||
+ | 0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion | ||
+ | 0x05 ===== = = === == Temperature Statistics (rev 1) == | ||
+ | 0x05 0x008 1 39 --- Current Temperature | ||
+ | 0x05 0x010 1 37 N-- Average Short Term Temperature | ||
+ | 0x05 0x018 1 36 N-- Average Long Term Temperature | ||
+ | 0x05 0x020 1 42 --- Highest Temperature | ||
+ | 0x05 0x028 1 17 --- Lowest Temperature | ||
+ | 0x05 0x030 1 40 N-- Highest Average Short Term Temperature | ||
+ | 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature | ||
+ | 0x05 0x040 1 39 N-- Highest Average Long Term Temperature | ||
+ | 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature | ||
+ | 0x05 0x050 4 0 --- Time in Over-Temperature | ||
+ | 0x05 0x058 1 60 --- Specified Maximum Operating Temperature | ||
+ | 0x05 0x060 4 0 --- Time in Under-Temperature | ||
+ | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature | ||
+ | 0x06 ===== = = === == Transport Statistics (rev 1) == | ||
+ | 0x06 0x008 4 328 --- Number of Hardware Resets | ||
+ | 0x06 0x010 4 75 --- Number of ASR Events | ||
+ | 0x06 0x018 4 0 --- Number of Interface CRC Errors | ||
+ | |||_ C monitored condition met | ||
+ | ||__ D supports DSN | ||
+ | |___ N normalized value | ||
+ | |||
+ | SATA Phy Event Counters (GP Log 0x11) | ||
+ | ID Size Value Description | ||
+ | 0x0001 2 0 Command failed due to ICRC error | ||
+ | 0x0002 2 0 R_ERR response for data FIS | ||
+ | 0x0003 2 0 R_ERR response for device-to-host data FIS | ||
+ | 0x0004 2 0 R_ERR response for host-to-device data FIS | ||
+ | 0x0005 2 0 R_ERR response for non-data FIS | ||
+ | 0x0006 2 0 R_ERR response for device-to-host non-data FIS | ||
+ | 0x0007 2 0 R_ERR response for host-to-device non-data FIS | ||
+ | 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | ||
+ | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET | ||
+ | 0x000b 2 0 CRC errors within host-to-device FIS | ||
+ | 0x000d 2 0 Non-CRC errors within host-to-device FIS | ||
+ | </pre> | ||
+ | ==== HGST HMS5C4040BLE640 (4TB) ==== | ||
+ | <pre> | ||
+ | smartctl 6.4 2015-06-04 r4109 [i686-w64-mingw32-2012r2(64)] (sf-6.4-1) | ||
+ | Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | |||
+ | === START OF INFORMATION SECTION === | ||
+ | Model Family: HGST MegaScale 4000 | ||
+ | Device Model: HGST HMS5C4040BLE640 | ||
+ | Serial Number: PL1331LAHE5ABI | ||
+ | LU WWN Device Id: 5 000cca 22ed4145a | ||
+ | Firmware Version: MPAOA5D0 | ||
+ | User Capacity: 4,000,787,030,016 bytes [4.00 TB] | ||
+ | Sector Sizes: 512 bytes logical, 4096 bytes physical | ||
+ | Rotation Rate: 5700 rpm | ||
+ | Form Factor: 3.5 inches | ||
+ | Device is: In smartctl database [for details use: -P show] | ||
+ | ATA Version is: ATA8-ACS T13/1699-D revision 4 | ||
+ | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | ||
+ | Local Time is: Tue Apr 23 20:13:09 2019 | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | AAM feature is: Unavailable | ||
+ | APM feature is: Disabled | ||
+ | Rd look-ahead is: Enabled | ||
+ | Write cache is: Enabled | ||
+ | ATA Security is: Disabled, NOT FROZEN [SEC1] | ||
+ | Wt Cache Reorder: Enabled | ||
+ | |||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | |||
+ | General SMART Values: | ||
+ | Offline data collection status: (0x82) Offline data collection activity | ||
+ | was completed without error. | ||
+ | Auto Offline Data Collection: Enabled. | ||
+ | Self-test execution status: ( 0) The previous self-test routine completed | ||
+ | without error or no self-test has ever | ||
+ | been run. | ||
+ | Total time to complete Offline | ||
+ | data collection: ( 28) seconds. | ||
+ | Offline data collection | ||
+ | capabilities: (0x5b) SMART execute Offline immediate. | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | No Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: (0x0003) Saves SMART data before entering | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: (0x01) Error logging supported. | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 1) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: ( 743) minutes. | ||
+ | SCT capabilities: (0x003d) SCT Status supported. | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | |||
+ | SMART Attributes Data Structure revision number: 16 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | ||
+ | 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 | ||
+ | 2 Throughput_Performance P-S--- 135 135 054 - 96 | ||
+ | 3 Spin_Up_Time POS--- 124 124 024 - 560 (Average 567) | ||
+ | 4 Start_Stop_Count -O--C- 100 100 000 - 41 | ||
+ | 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | ||
+ | 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | ||
+ | 8 Seek_Time_Performance P-S--- 113 113 020 - 42 | ||
+ | 9 Power_On_Hours -O--C- 098 098 000 - 19846 | ||
+ | 10 Spin_Retry_Count PO--C- 100 100 060 - 0 | ||
+ | 12 Power_Cycle_Count -O--CK 100 100 000 - 41 | ||
+ | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 825 | ||
+ | 193 Load_Cycle_Count -O--C- 100 100 000 - 825 | ||
+ | 194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 16/42) | ||
+ | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | ||
+ | 197 Current_Pending_Sector -O---K 100 100 000 - 0 | ||
+ | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | ||
+ | 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | ||
+ | ||||||_ K auto-keep | ||
+ | |||||__ C event count | ||
+ | ||||___ R error rate | ||
+ | |||____ S speed/performance | ||
+ | ||_____ O updated online | ||
+ | |______ P prefailure warning | ||
+ | |||
+ | General Purpose Log Directory Version 1 | ||
+ | SMART Log Directory Version 1 [multi-sector log support] | ||
+ | Address Access R/W Size Description | ||
+ | 0x00 GPL,SL R/O 1 Log Directory | ||
+ | 0x01 SL R/O 1 Summary SMART error log | ||
+ | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log | ||
+ | 0x04 GPL R/O 7 Device Statistics log | ||
+ | 0x06 SL R/O 1 SMART self-test log | ||
+ | 0x07 GPL R/O 1 Extended self-test log | ||
+ | 0x08 GPL R/O 2 Power Conditions log | ||
+ | 0x09 SL R/W 1 Selective self-test log | ||
+ | 0x10 GPL R/O 1 SATA NCQ Queued Error log | ||
+ | 0x11 GPL R/O 1 SATA Phy Event Counters log | ||
+ | 0x20 GPL R/O 1 Streaming performance log [OBS-8] | ||
+ | 0x21 GPL R/O 1 Write stream error log | ||
+ | 0x22 GPL R/O 1 Read stream error log | ||
+ | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log | ||
+ | 0xe0 GPL,SL R/W 1 SCT Command/Status | ||
+ | 0xe1 GPL,SL R/W 1 SCT Data Transfer | ||
+ | |||
+ | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | ||
+ | No Errors Logged | ||
+ | |||
+ | SMART Extended Self-test Log Version: 1 (1 sectors) | ||
+ | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | ||
+ | # 1 Short offline Completed without error 00% 19829 - | ||
+ | # 2 Short offline Completed without error 00% 19757 - | ||
+ | # 3 Short offline Completed without error 00% 19661 - | ||
+ | # 4 Short offline Completed without error 00% 19589 - | ||
+ | # 5 Short offline Completed without error 00% 19493 - | ||
+ | # 6 Short offline Completed without error 00% 19422 - | ||
+ | # 7 Short offline Completed without error 00% 19325 - | ||
+ | # 8 Short offline Completed without error 00% 19253 - | ||
+ | # 9 Short offline Completed without error 00% 19157 - | ||
+ | #10 Short offline Completed without error 00% 19085 - | ||
+ | #11 Short offline Completed without error 00% 18989 - | ||
+ | #12 Short offline Completed without error 00% 18917 - | ||
+ | #13 Short offline Completed without error 00% 18821 - | ||
+ | #14 Short offline Completed without error 00% 18749 - | ||
+ | #15 Short offline Completed without error 00% 18653 - | ||
+ | #16 Short offline Completed without error 00% 18581 - | ||
+ | #17 Short offline Completed without error 00% 18485 - | ||
+ | #18 Short offline Completed without error 00% 18413 - | ||
+ | #19 Short offline Completed without error 00% 18317 - | ||
+ | |||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | |||
+ | SCT Status Version: 3 | ||
+ | SCT Version (vendor specific): 256 (0x0100) | ||
+ | SCT Support Level: 1 | ||
+ | Device State: Active (0) | ||
+ | Current Temperature: 38 Celsius | ||
+ | Power Cycle Min/Max Temperature: 28/39 Celsius | ||
+ | Lifetime Min/Max Temperature: 16/42 Celsius | ||
+ | Under/Over Temperature Limit Count: 0/0 | ||
+ | |||
+ | SCT Temperature History Version: 2 | ||
+ | Temperature Sampling Period: 1 minute | ||
+ | Temperature Logging Interval: 1 minute | ||
+ | Min/Max recommended Temperature: 0/60 Celsius | ||
+ | Min/Max Temperature Limit: -40/70 Celsius | ||
+ | Temperature History Size (Index): 128 (75) | ||
+ | |||
+ | Index Estimated Time Temperature Celsius | ||
+ | 76 2019-04-23 18:06 38 ******************* | ||
+ | ... ..(126 skipped). .. ******************* | ||
+ | 75 2019-04-23 20:13 38 ******************* | ||
+ | |||
+ | SCT Error Recovery Control: | ||
+ | Read: Disabled | ||
+ | Write: Disabled | ||
+ | |||
+ | Device Statistics (GP Log 0x04) | ||
+ | Page Offset Size Value Flags Description | ||
+ | 0x01 ===== = = === == General Statistics (rev 2) == | ||
+ | 0x01 0x008 4 41 --- Lifetime Power-On Resets | ||
+ | 0x01 0x018 6 7663959194 --- Logical Sectors Written | ||
+ | 0x01 0x020 6 5705503 --- Number of Write Commands | ||
+ | 0x01 0x028 6 58119952858 --- Logical Sectors Read | ||
+ | 0x01 0x030 6 76400492 --- Number of Read Commands | ||
+ | 0x03 ===== = = === == Rotating Media Statistics (rev 1) == | ||
+ | 0x03 0x008 4 19842 --- Spindle Motor Power-on Hours | ||
+ | 0x03 0x010 4 19842 --- Head Flying Hours | ||
+ | 0x03 0x018 4 825 --- Head Load Events | ||
+ | 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors | ||
+ | 0x03 0x028 4 0 --- Read Recovery Attempts | ||
+ | 0x03 0x030 4 0 --- Number of Mechanical Start Failures | ||
+ | 0x04 ===== = = === == General Errors Statistics (rev 1) == | ||
+ | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | ||
+ | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | ||
+ | 0x05 ===== = = === == Temperature Statistics (rev 1) == | ||
+ | 0x05 0x008 1 38 --- Current Temperature | ||
+ | 0x05 0x010 1 37 N-- Average Short Term Temperature | ||
+ | 0x05 0x018 1 35 N-- Average Long Term Temperature | ||
+ | 0x05 0x020 1 42 --- Highest Temperature | ||
+ | 0x05 0x028 1 16 --- Lowest Temperature | ||
+ | 0x05 0x030 1 41 N-- Highest Average Short Term Temperature | ||
+ | 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature | ||
+ | 0x05 0x040 1 38 N-- Highest Average Long Term Temperature | ||
+ | 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature | ||
+ | 0x05 0x050 4 0 --- Time in Over-Temperature | ||
+ | 0x05 0x058 1 60 --- Specified Maximum Operating Temperature | ||
+ | 0x05 0x060 4 0 --- Time in Under-Temperature | ||
+ | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature | ||
+ | 0x06 ===== = = === == Transport Statistics (rev 1) == | ||
+ | 0x06 0x008 4 6322 --- Number of Hardware Resets | ||
+ | 0x06 0x010 4 211 --- Number of ASR Events | ||
+ | 0x06 0x018 4 0 --- Number of Interface CRC Errors | ||
+ | |||_ C monitored condition met | ||
+ | ||__ D supports DSN | ||
+ | |___ N normalized value | ||
+ | |||
+ | SATA Phy Event Counters (GP Log 0x11) | ||
+ | ID Size Value Description | ||
+ | 0x0001 2 0 Command failed due to ICRC error | ||
+ | 0x0002 2 0 R_ERR response for data FIS | ||
+ | 0x0003 2 0 R_ERR response for device-to-host data FIS | ||
+ | 0x0004 2 0 R_ERR response for host-to-device data FIS | ||
+ | 0x0005 2 0 R_ERR response for non-data FIS | ||
+ | 0x0006 2 0 R_ERR response for device-to-host non-data FIS | ||
+ | 0x0007 2 0 R_ERR response for host-to-device non-data FIS | ||
+ | 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | ||
+ | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET | ||
+ | 0x000b 2 0 CRC errors within host-to-device FIS | ||
+ | 0x000d 2 0 Non-CRC errors within host-to-device FIS | ||
+ | |||
+ | |||
+ | </pre> | ||
=== HGST Ultrastar He8 === | === HGST Ultrastar He8 === | ||
==== HGST HUH728080ALE600 (8TB) ==== | ==== HGST HUH728080ALE600 (8TB) ==== | ||
Line 1,444: | Line 1,896: | ||
SMART Attributes Data Structure revision number: 10 | SMART Attributes Data Structure revision number: 10 | ||
+ | </pre> | ||
+ | |||
+ | === Seagate Enterprise Capacity === | ||
+ | ==== ST10000NM0016-1TT101 (10TB) ==== | ||
+ | <pre> | ||
+ | smartctl 6.2 2017-02-27 r4394 [x86_64-linux-3.10.0-693.5.2.el7.x86_64] (local build) | ||
+ | Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | |||
+ | === START OF INFORMATION SECTION === | ||
+ | Model Family: Seagate Enterprise Capacity 3.5 HDD | ||
+ | Device Model: ST10000NM0016-1TT101 | ||
+ | Serial Number: <edited out> | ||
+ | LU WWN Device Id: 5 000c50 0a32d97b5 | ||
+ | Firmware Version: SND0 | ||
+ | User Capacity: 10,000,831,348,736 bytes [10.0 TB] | ||
+ | Sector Sizes: 512 bytes logical, 4096 bytes physical | ||
+ | Rotation Rate: 7200 rpm | ||
+ | Device is: In smartctl database [for details use: -P show] | ||
+ | ATA Version is: ACS-3 (unknown minor revision code: 0x006d) | ||
+ | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | ||
+ | Local Time is: Tue Apr 10 10:09:57 2018 CDT | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | AAM feature is: Unavailable | ||
+ | APM feature is: Unavailable | ||
+ | Rd look-ahead is: Enabled | ||
+ | Write cache is: Enabled | ||
+ | ATA Security is: Disabled, NOT FROZEN [SEC1] | ||
+ | Wt Cache Reorder: Enabled | ||
+ | |||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | |||
+ | General SMART Values: | ||
+ | Offline data collection status: (0x82) Offline data collection activity | ||
+ | was completed without error. | ||
+ | Auto Offline Data Collection: Enabled. | ||
+ | Self-test execution status: ( 0) The previous self-test routine completed | ||
+ | without error or no self-test has ever | ||
+ | been run. | ||
+ | Total time to complete Offline | ||
+ | data collection: ( 567) seconds. | ||
+ | Offline data collection | ||
+ | capabilities: (0x7b) SMART execute Offline immediate. | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: (0x0003) Saves SMART data before entering | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: (0x01) Error logging supported. | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 1) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: ( 848) minutes. | ||
+ | Conveyance self-test routine | ||
+ | recommended polling time: ( 2) minutes. | ||
+ | SCT capabilities: (0x50bd) SCT Status supported. | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | |||
+ | SMART Attributes Data Structure revision number: 10 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | ||
+ | 1 Raw_Read_Error_Rate POSR-- 083 064 044 - 181534504 | ||
+ | 3 Spin_Up_Time PO---- 094 094 000 - 0 | ||
+ | 4 Start_Stop_Count -O--CK 100 100 020 - 6 | ||
+ | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 | ||
+ | 7 Seek_Error_Rate POSR-- 088 060 045 - 656392529 | ||
+ | 9 Power_On_Hours -O--CK 096 096 000 - 3553 (46 93 0) | ||
+ | 10 Spin_Retry_Count PO--C- 100 100 097 - 0 | ||
+ | 12 Power_Cycle_Count -O--CK 100 100 020 - 6 | ||
+ | 184 End-to-End_Error -O--CK 100 100 099 - 0 | ||
+ | 187 Reported_Uncorrect -O--CK 100 100 000 - 0 | ||
+ | 188 Command_Timeout -O--CK 100 100 000 - 0 0 0 | ||
+ | 189 High_Fly_Writes -O-RCK 084 084 000 - 16 | ||
+ | 190 Airflow_Temperature_Cel -O---K 073 064 040 - 27 (Min/Max 22/36) | ||
+ | 191 G-Sense_Error_Rate -O--CK 097 097 000 - 7465 | ||
+ | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 8 | ||
+ | 193 Load_Cycle_Count -O--CK 087 087 000 - 26119 | ||
+ | 194 Temperature_Celsius -O---K 027 040 000 - 27 (0 20 0 0 0) | ||
+ | 195 Hardware_ECC_Recovered -O-RC- 033 003 000 - 181534504 | ||
+ | 197 Current_Pending_Sector -O--C- 100 100 000 - 0 | ||
+ | 198 Offline_Uncorrectable ----C- 100 100 000 - 0 | ||
+ | 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2 | ||
+ | 240 Head_Flying_Hours ------ 100 253 000 - 2435h+15m+52.041s | ||
+ | 241 Total_LBAs_Written ------ 100 253 000 - 115878887963 | ||
+ | 242 Total_LBAs_Read ------ 100 253 000 - 459691652076 | ||
+ | ||||||_ K auto-keep | ||
+ | |||||__ C event count | ||
+ | ||||___ R error rate | ||
+ | |||____ S speed/performance | ||
+ | ||_____ O updated online | ||
+ | |______ P prefailure warning | ||
+ | |||
+ | General Purpose Log Directory Version 1 | ||
+ | SMART Log Directory Version 1 [multi-sector log support] | ||
+ | Address Access R/W Size Description | ||
+ | 0x00 GPL,SL R/O 1 Log Directory | ||
+ | 0x01 SL R/O 1 Summary SMART error log | ||
+ | 0x02 SL R/O 5 Comprehensive SMART error log | ||
+ | 0x03 GPL R/O 5 Ext. Comprehensive SMART error log | ||
+ | 0x04 GPL R/O 256 Device Statistics log | ||
+ | 0x04 SL R/O 8 Device Statistics log | ||
+ | 0x06 SL R/O 1 SMART self-test log | ||
+ | 0x07 GPL R/O 1 Extended self-test log | ||
+ | 0x08 GPL R/O 2 Power Conditions log | ||
+ | 0x09 SL R/W 1 Selective self-test log | ||
+ | 0x0c GPL - 2048 Reserved | ||
+ | 0x10 GPL R/O 1 NCQ Command Error log | ||
+ | 0x11 GPL R/O 1 SATA Phy Event Counters | ||
+ | 0x13 GPL R/O 1 SATA NCQ Send and Receive log | ||
+ | 0x15 GPL - 1 Reserved for Serial ATA | ||
+ | 0x21 GPL R/O 1 Write stream error log | ||
+ | 0x22 GPL R/O 1 Read stream error log | ||
+ | 0x24 GPL R/O 768 Current Device Internal Status Data log | ||
+ | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | ||
+ | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log | ||
+ | 0xa1 GPL,SL VS 24 Device vendor specific log | ||
+ | 0xa2 GPL VS 16320 Device vendor specific log | ||
+ | 0xa6 GPL VS 192 Device vendor specific log | ||
+ | 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log | ||
+ | 0xab GPL VS 1 Device vendor specific log | ||
+ | 0xad GPL VS 16 Device vendor specific log | ||
+ | 0xb0 GPL VS 17208 Device vendor specific log | ||
+ | 0xbe-0xbf GPL VS 65535 Device vendor specific log | ||
+ | 0xc1 GPL,SL VS 16 Device vendor specific log | ||
+ | 0xc3 GPL,SL VS 8 Device vendor specific log | ||
+ | 0xc9 GPL,SL VS 8 Device vendor specific log | ||
+ | 0xca GPL,SL VS 16 Device vendor specific log | ||
+ | 0xd1 GPL VS 304 Device vendor specific log | ||
+ | 0xd2 GPL VS 10000 Device vendor specific log | ||
+ | 0xd4 GPL VS 2048 Device vendor specific log | ||
+ | 0xe0 GPL,SL R/W 1 SCT Command/Status | ||
+ | 0xe1 GPL,SL R/W 1 SCT Data Transfer | ||
+ | |||
+ | SMART Extended Comprehensive Error Log Version: 1 (5 sectors) | ||
+ | No Errors Logged | ||
+ | |||
+ | SMART Extended Self-test Log Version: 1 (1 sectors) | ||
+ | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | ||
+ | # 1 Extended offline Completed without error 00% 1161 - | ||
+ | |||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | |||
+ | SCT Status Version: 3 | ||
+ | SCT Version (vendor specific): 522 (0x020a) | ||
+ | SCT Support Level: 1 | ||
+ | Device State: Active (0) | ||
+ | Current Temperature: 27 Celsius | ||
+ | Power Cycle Min/Max Temperature: 22/36 Celsius | ||
+ | Lifetime Min/Max Temperature: 20/52 Celsius | ||
+ | Under/Over Temperature Limit Count: 0/2446 | ||
+ | SCT Temperature History Version: 2 | ||
+ | Temperature Sampling Period: 3 minutes | ||
+ | Temperature Logging Interval: 59 minutes | ||
+ | Min/Max recommended Temperature: 0/ 0 Celsius | ||
+ | Min/Max Temperature Limit: 0/ 0 Celsius | ||
+ | Temperature History Size (Index): 128 (7) | ||
+ | |||
+ | Index Estimated Time Temperature Celsius | ||
+ | 0 2018-04-10 02:56 26 ******* | ||
+ | 1 2018-04-10 03:55 25 ****** | ||
+ | 2 2018-04-10 04:54 25 ****** | ||
+ | 3 2018-04-10 05:53 25 ****** | ||
+ | 4 2018-04-10 06:52 26 ******* | ||
+ | 5 2018-04-10 07:51 27 ******** | ||
+ | 6 2018-04-10 08:50 27 ******** | ||
+ | 7 2018-04-10 09:49 27 ******** | ||
+ | |||
+ | SCT Error Recovery Control: | ||
+ | Read: 100 (10.0 seconds) | ||
+ | Write: 100 (10.0 seconds) | ||
+ | |||
+ | Device Statistics (GP Log 0x04) | ||
+ | Page Offset Size Value Description | ||
+ | 1 ===== = = == General Statistics (rev 1) == | ||
+ | 1 0x008 4 6 Lifetime Power-On Resets | ||
+ | 1 0x010 4 3553 Power-on Hours | ||
+ | 1 0x018 6 115878885011 Logical Sectors Written | ||
+ | 1 0x020 6 268245477 Number of Write Commands | ||
+ | 1 0x028 6 459691651524 Logical Sectors Read | ||
+ | 1 0x030 6 1601551638 Number of Read Commands | ||
+ | 1 0x038 6 - Date and Time TimeStamp | ||
+ | 3 ===== = = == Rotating Media Statistics (rev 1) == | ||
+ | 3 0x008 4 1594330626~ Spindle Motor Power-on Hours | ||
+ | 3 0x010 4 1594327100~ Head Flying Hours | ||
+ | 3 0x018 4 26119 Head Load Events | ||
+ | 3 0x020 4 0 Number of Reallocated Logical Sectors | ||
+ | 3 0x028 4 0 Read Recovery Attempts | ||
+ | 3 0x030 4 0 Number of Mechanical Start Failures | ||
+ | 3 0x038 4 0 Number of Realloc. Candidate Logical Sectors | ||
+ | 3 0x040 7 8 Unknown | ||
+ | 4 ===== = = == General Errors Statistics (rev 1) == | ||
+ | 4 0x008 4 0 Number of Reported Uncorrectable Errors | ||
+ | 4 0x010 4 0 Resets Between Cmd Acceptance and Completion | ||
+ | 5 ===== = = == Temperature Statistics (rev 1) == | ||
+ | 5 0x008 1 27 Current Temperature | ||
+ | 5 0x010 1 27 Average Short Term Temperature | ||
+ | 5 0x018 1 26 Average Long Term Temperature | ||
+ | 5 0x020 1 36 Highest Temperature | ||
+ | 5 0x028 1 0 Lowest Temperature | ||
+ | 5 0x030 1 34 Highest Average Short Term Temperature | ||
+ | 5 0x038 1 25 Lowest Average Short Term Temperature | ||
+ | 5 0x040 1 29 Highest Average Long Term Temperature | ||
+ | 5 0x048 1 26 Lowest Average Long Term Temperature | ||
+ | 5 0x050 4 0 Time in Over-Temperature | ||
+ | 5 0x058 1 60 Specified Maximum Operating Temperature | ||
+ | 5 0x060 4 20 Time in Under-Temperature | ||
+ | 5 0x068 1 5 Specified Minimum Operating Temperature | ||
+ | 6 ===== = = == Transport Statistics (rev 1) == | ||
+ | 6 0x008 4 11 Number of Hardware Resets | ||
+ | 6 0x010 4 1 Number of ASR Events | ||
+ | 6 0x018 4 2 Number of Interface CRC Errors | ||
+ | 255 ===== = = == Unknown Statistics (rev 1) == | ||
+ | 255 0x008 7 0 Unknown | ||
+ | |_ ~ normalized value | ||
+ | |||
+ | SATA Phy Event Counters (GP Log 0x11) | ||
+ | ID Size Value Description | ||
+ | 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET | ||
+ | 0x0001 2 0 Command failed due to ICRC error | ||
+ | 0x0003 2 0 R_ERR response for device-to-host data FIS | ||
+ | 0x0004 2 0 R_ERR response for host-to-device data FIS | ||
+ | 0x0006 2 0 R_ERR response for device-to-host non-data FIS | ||
+ | 0x0007 2 0 R_ERR response for host-to-device non-data FIS | ||
</pre> | </pre> | ||
Line 1,756: | Line 2,449: | ||
ID Size Value Description | ID Size Value Description | ||
0x000a 2 103 Device-to-host register FISes sent due to a COMRESET | 0x000a 2 103 Device-to-host register FISes sent due to a COMRESET | ||
+ | 0x0001 2 0 Command failed due to ICRC error | ||
+ | 0x0003 2 0 R_ERR response for device-to-host data FIS | ||
+ | 0x0004 2 0 R_ERR response for host-to-device data FIS | ||
+ | 0x0006 2 0 R_ERR response for device-to-host non-data FIS | ||
+ | 0x0007 2 0 R_ERR response for host-to-device non-data FIS | ||
+ | </pre> | ||
+ | ==== ST4000NM0033-9ZM170 (4TB) ==== | ||
+ | <pre> | ||
+ | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.18-9-pve] (local build) | ||
+ | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | |||
+ | === START OF INFORMATION SECTION === | ||
+ | Model Family: Seagate Constellation ES.3 | ||
+ | Device Model: ST4000NM0033-9ZM170 | ||
+ | Serial Number: S1Z10PDB | ||
+ | LU WWN Device Id: 5 000c50 08081bbf7 | ||
+ | Firmware Version: SN04 | ||
+ | User Capacity: 4,000,787,030,016 bytes [4.00 TB] | ||
+ | Sector Size: 512 bytes logical/physical | ||
+ | Rotation Rate: 7200 rpm | ||
+ | Form Factor: 3.5 inches | ||
+ | Device is: In smartctl database [for details use: -P show] | ||
+ | ATA Version is: ACS-2 (minor revision not indicated) | ||
+ | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | ||
+ | Local Time is: Tue Apr 23 19:57:29 2019 CST | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | AAM feature is: Unavailable | ||
+ | APM feature is: Unavailable | ||
+ | Rd look-ahead is: Enabled | ||
+ | Write cache is: Enabled | ||
+ | ATA Security is: Disabled, NOT FROZEN [SEC1] | ||
+ | Wt Cache Reorder: Enabled | ||
+ | |||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | |||
+ | General SMART Values: | ||
+ | Offline data collection status: (0x82) Offline data collection activity | ||
+ | was completed without error. | ||
+ | Auto Offline Data Collection: Enabled. | ||
+ | Self-test execution status: ( 0) The previous self-test routine completed | ||
+ | without error or no self-test has ever | ||
+ | been run. | ||
+ | Total time to complete Offline | ||
+ | data collection: ( 600) seconds. | ||
+ | Offline data collection | ||
+ | capabilities: (0x7b) SMART execute Offline immediate. | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: (0x0003) Saves SMART data before entering | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: (0x01) Error logging supported. | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 1) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: ( 498) minutes. | ||
+ | Conveyance self-test routine | ||
+ | recommended polling time: ( 2) minutes. | ||
+ | SCT capabilities: (0x50bd) SCT Status supported. | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | |||
+ | SMART Attributes Data Structure revision number: 10 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | ||
+ | 1 Raw_Read_Error_Rate POSR-- 070 063 044 - 11041842 | ||
+ | 3 Spin_Up_Time PO---- 093 092 000 - 0 | ||
+ | 4 Start_Stop_Count -O--CK 100 100 020 - 80 | ||
+ | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 | ||
+ | 7 Seek_Error_Rate POSR-- 090 060 030 - 1009049582 | ||
+ | 9 Power_On_Hours -O--CK 069 069 000 - 27508 | ||
+ | 10 Spin_Retry_Count PO--C- 100 100 097 - 0 | ||
+ | 12 Power_Cycle_Count -O--CK 100 100 020 - 81 | ||
+ | 184 End-to-End_Error -O--CK 100 100 099 - 0 | ||
+ | 187 Reported_Uncorrect -O--CK 100 100 000 - 0 | ||
+ | 188 Command_Timeout -O--CK 100 100 000 - 0 | ||
+ | 189 High_Fly_Writes -O-RCK 100 100 000 - 0 | ||
+ | 190 Airflow_Temperature_Cel -O---K 069 046 045 - 31 (Min/Max 23/33) | ||
+ | 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 | ||
+ | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 80 | ||
+ | 193 Load_Cycle_Count -O--CK 100 100 000 - 1206 | ||
+ | 194 Temperature_Celsius -O---K 031 054 000 - 31 (0 12 0 0 0) | ||
+ | 195 Hardware_ECC_Recovered -O-RC- 059 010 000 - 11041842 | ||
+ | 197 Current_Pending_Sector -O--C- 100 100 000 - 0 | ||
+ | 198 Offline_Uncorrectable ----C- 100 100 000 - 0 | ||
+ | 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 | ||
+ | ||||||_ K auto-keep | ||
+ | |||||__ C event count | ||
+ | ||||___ R error rate | ||
+ | |||____ S speed/performance | ||
+ | ||_____ O updated online | ||
+ | |______ P prefailure warning | ||
+ | |||
+ | General Purpose Log Directory Version 1 | ||
+ | SMART Log Directory Version 1 [multi-sector log support] | ||
+ | Address Access R/W Size Description | ||
+ | 0x00 GPL,SL R/O 1 Log Directory | ||
+ | 0x01 SL R/O 1 Summary SMART error log | ||
+ | 0x02 SL R/O 5 Comprehensive SMART error log | ||
+ | 0x03 GPL R/O 5 Ext. Comprehensive SMART error log | ||
+ | 0x06 SL R/O 1 SMART self-test log | ||
+ | 0x07 GPL R/O 1 Extended self-test log | ||
+ | 0x08 GPL,SL R/O 2 Power Conditions log | ||
+ | 0x09 SL R/W 1 Selective self-test log | ||
+ | 0x10 GPL R/O 1 SATA NCQ Queued Error log | ||
+ | 0x11 GPL R/O 1 SATA Phy Event Counters log | ||
+ | 0x21 GPL R/O 1 Write stream error log | ||
+ | 0x22 GPL R/O 1 Read stream error log | ||
+ | 0x24 GPL R/O 512 Current Device Internal Status Data log | ||
+ | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | ||
+ | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log | ||
+ | 0xa1 GPL,SL VS 20 Device vendor specific log | ||
+ | 0xa2 GPL VS 4496 Device vendor specific log | ||
+ | 0xa8 GPL,SL VS 129 Device vendor specific log | ||
+ | 0xa9 GPL,SL VS 1 Device vendor specific log | ||
+ | 0xb0 GPL VS 5176 Device vendor specific log | ||
+ | 0xbd GPL VS 512 Device vendor specific log | ||
+ | 0xbe-0xbf GPL VS 65535 Device vendor specific log | ||
+ | 0xc1 GPL,SL VS 10 Device vendor specific log | ||
+ | 0xc2 GPL,SL VS 50 Device vendor specific log | ||
+ | 0xc3 GPL,SL VS 8 Device vendor specific log | ||
+ | 0xc4 GPL,SL VS 5 Device vendor specific log | ||
+ | 0xd1 GPL,SL VS 8 Device vendor specific log | ||
+ | 0xe0 GPL,SL R/W 1 SCT Command/Status | ||
+ | 0xe1 GPL,SL R/W 1 SCT Data Transfer | ||
+ | |||
+ | SMART Extended Comprehensive Error Log Version: 1 (5 sectors) | ||
+ | No Errors Logged | ||
+ | |||
+ | SMART Extended Self-test Log Version: 1 (1 sectors) | ||
+ | No self-tests have been logged. [To run self-tests, use: smartctl -t] | ||
+ | |||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | |||
+ | SCT Status Version: 3 | ||
+ | SCT Version (vendor specific): 522 (0x020a) | ||
+ | SCT Support Level: 1 | ||
+ | Device State: Active (0) | ||
+ | Current Temperature: 30 Celsius | ||
+ | Power Cycle Min/Max Temperature: 23/33 Celsius | ||
+ | Lifetime Min/Max Temperature: 12/54 Celsius | ||
+ | Under/Over Temperature Limit Count: 0/4597 | ||
+ | |||
+ | SCT Temperature History Version: 2 | ||
+ | Temperature Sampling Period: 1 minute | ||
+ | Temperature Logging Interval: 10 minutes | ||
+ | Min/Max recommended Temperature: 0/ 0 Celsius | ||
+ | Min/Max Temperature Limit: 0/ 0 Celsius | ||
+ | Temperature History Size (Index): 128 (77) | ||
+ | |||
+ | Index Estimated Time Temperature Celsius | ||
+ | 78 2019-04-22 22:40 31 ************ | ||
+ | |||
+ | SCT Error Recovery Control: | ||
+ | Read: 100 (10.0 seconds) | ||
+ | Write: 100 (10.0 seconds) | ||
+ | |||
+ | Device Statistics (GP/SMART Log 0x04) not supported | ||
+ | |||
+ | SATA Phy Event Counters (GP Log 0x11) | ||
+ | ID Size Value Description | ||
+ | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET | ||
+ | 0x0001 2 0 Command failed due to ICRC error | ||
+ | 0x0003 2 0 R_ERR response for device-to-host data FIS | ||
+ | 0x0004 2 0 R_ERR response for host-to-device data FIS | ||
+ | 0x0006 2 0 R_ERR response for device-to-host non-data FIS | ||
+ | 0x0007 2 0 R_ERR response for host-to-device non-data FIS | ||
+ | </pre> | ||
+ | |||
+ | ==== ST4000NM0035-1V4107 (4TB) ==== | ||
+ | <pre> | ||
+ | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.18-9-pve] (local build) | ||
+ | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | |||
+ | === START OF INFORMATION SECTION === | ||
+ | Device Model: ST4000NM0035-1V4107 | ||
+ | Serial Number: ZC19CLL4 | ||
+ | LU WWN Device Id: 5 000c50 0b3c35b95 | ||
+ | Firmware Version: TN04 | ||
+ | User Capacity: 4,000,787,030,016 bytes [4.00 TB] | ||
+ | Sector Size: 512 bytes logical/physical | ||
+ | Rotation Rate: 7200 rpm | ||
+ | Form Factor: 3.5 inches | ||
+ | Device is: Not in smartctl database [for details use: -P showall] | ||
+ | ATA Version is: ACS-3 T13/2161-D revision 5 | ||
+ | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | ||
+ | Local Time is: Tue Apr 23 20:02:28 2019 CST | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | AAM feature is: Unavailable | ||
+ | APM feature is: Unavailable | ||
+ | Rd look-ahead is: Enabled | ||
+ | Write cache is: Enabled | ||
+ | ATA Security is: Disabled, NOT FROZEN [SEC1] | ||
+ | Wt Cache Reorder: Enabled | ||
+ | |||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | |||
+ | General SMART Values: | ||
+ | Offline data collection status: (0x82) Offline data collection activity | ||
+ | was completed without error. | ||
+ | Auto Offline Data Collection: Enabled. | ||
+ | Self-test execution status: ( 0) The previous self-test routine completed | ||
+ | without error or no self-test has ever | ||
+ | been run. | ||
+ | Total time to complete Offline | ||
+ | data collection: ( 575) seconds. | ||
+ | Offline data collection | ||
+ | capabilities: (0x7b) SMART execute Offline immediate. | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: (0x0003) Saves SMART data before entering | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: (0x01) Error logging supported. | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 1) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: ( 402) minutes. | ||
+ | Conveyance self-test routine | ||
+ | recommended polling time: ( 2) minutes. | ||
+ | SCT capabilities: (0x50bd) SCT Status supported. | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | |||
+ | SMART Attributes Data Structure revision number: 10 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | ||
+ | 1 Raw_Read_Error_Rate POSR-- 076 064 044 - 40058651 | ||
+ | 3 Spin_Up_Time PO---- 100 100 000 - 0 | ||
+ | 4 Start_Stop_Count -O--CK 100 100 020 - 1 | ||
+ | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 | ||
+ | 7 Seek_Error_Rate POSR-- 083 060 045 - 197161731 | ||
+ | 9 Power_On_Hours -O--CK 100 100 000 - 767 | ||
+ | 10 Spin_Retry_Count PO--C- 100 100 097 - 0 | ||
+ | 12 Power_Cycle_Count -O--CK 100 100 020 - 1 | ||
+ | 184 End-to-End_Error -O--CK 100 100 099 - 0 | ||
+ | 187 Reported_Uncorrect -O--CK 100 100 000 - 0 | ||
+ | 188 Command_Timeout -O--CK 100 100 000 - 0 | ||
+ | 189 High_Fly_Writes -O-RCK 100 100 000 - 0 | ||
+ | 190 Airflow_Temperature_Cel -O---K 073 071 040 - 27 (Min/Max 22/29) | ||
+ | 191 G-Sense_Error_Rate -O--CK 100 100 000 - 432 | ||
+ | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 25 | ||
+ | 193 Load_Cycle_Count -O--CK 100 100 000 - 36 | ||
+ | 194 Temperature_Celsius -O---K 027 040 000 - 27 (0 22 0 0 0) | ||
+ | 195 Hardware_ECC_Recovered -O-RC- 001 001 000 - 40058651 | ||
+ | 197 Current_Pending_Sector -O--C- 100 100 000 - 0 | ||
+ | 198 Offline_Uncorrectable ----C- 100 100 000 - 0 | ||
+ | 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 | ||
+ | 240 Head_Flying_Hours ------ 100 253 000 - 764 (144 24 0) | ||
+ | 241 Total_LBAs_Written ------ 100 253 000 - 927745061 | ||
+ | 242 Total_LBAs_Read ------ 100 253 000 - 1309602584 | ||
+ | ||||||_ K auto-keep | ||
+ | |||||__ C event count | ||
+ | ||||___ R error rate | ||
+ | |||____ S speed/performance | ||
+ | ||_____ O updated online | ||
+ | |______ P prefailure warning | ||
+ | |||
+ | General Purpose Log Directory Version 1 | ||
+ | SMART Log Directory Version 1 [multi-sector log support] | ||
+ | Address Access R/W Size Description | ||
+ | 0x00 GPL,SL R/O 1 Log Directory | ||
+ | 0x01 SL R/O 1 Summary SMART error log | ||
+ | 0x02 SL R/O 5 Comprehensive SMART error log | ||
+ | 0x03 GPL R/O 5 Ext. Comprehensive SMART error log | ||
+ | 0x04 GPL,SL R/O 8 Device Statistics log | ||
+ | 0x06 SL R/O 1 SMART self-test log | ||
+ | 0x07 GPL R/O 1 Extended self-test log | ||
+ | 0x08 GPL R/O 2 Power Conditions log | ||
+ | 0x09 SL R/W 1 Selective self-test log | ||
+ | 0x0c GPL R/O 2048 Pending Defects log | ||
+ | 0x10 GPL R/O 1 SATA NCQ Queued Error log | ||
+ | 0x11 GPL R/O 1 SATA Phy Event Counters log | ||
+ | 0x13 GPL R/O 1 SATA NCQ Send and Receive log | ||
+ | 0x15 GPL R/W 1 SATA Rebuild Assist log | ||
+ | 0x21 GPL R/O 1 Write stream error log | ||
+ | 0x22 GPL R/O 1 Read stream error log | ||
+ | 0x24 GPL R/O 512 Current Device Internal Status Data log | ||
+ | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | ||
+ | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log | ||
+ | 0xa1 GPL,SL VS 24 Device vendor specific log | ||
+ | 0xa2 GPL VS 8160 Device vendor specific log | ||
+ | 0xa6 GPL VS 192 Device vendor specific log | ||
+ | 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log | ||
+ | 0xad GPL VS 16 Device vendor specific log | ||
+ | 0xb0 GPL VS 9048 Device vendor specific log | ||
+ | 0xbe-0xbf GPL VS 65535 Device vendor specific log | ||
+ | 0xc1 GPL,SL VS 16 Device vendor specific log | ||
+ | 0xc3 GPL,SL VS 8 Device vendor specific log | ||
+ | 0xd1 GPL VS 264 Device vendor specific log | ||
+ | 0xd2 GPL VS 10000 Device vendor specific log | ||
+ | 0xd4 GPL VS 2048 Device vendor specific log | ||
+ | 0xda GPL,SL VS 1 Device vendor specific log | ||
+ | 0xe0 GPL,SL R/W 1 SCT Command/Status | ||
+ | 0xe1 GPL,SL R/W 1 SCT Data Transfer | ||
+ | |||
+ | SMART Extended Comprehensive Error Log Version: 1 (5 sectors) | ||
+ | No Errors Logged | ||
+ | |||
+ | SMART Extended Self-test Log Version: 1 (1 sectors) | ||
+ | No self-tests have been logged. [To run self-tests, use: smartctl -t] | ||
+ | |||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | |||
+ | SCT Status Version: 3 | ||
+ | SCT Version (vendor specific): 522 (0x020a) | ||
+ | SCT Support Level: 1 | ||
+ | Device State: Active (0) | ||
+ | Current Temperature: 27 Celsius | ||
+ | Power Cycle Min/Max Temperature: 22/29 Celsius | ||
+ | Lifetime Min/Max Temperature: 22/29 Celsius | ||
+ | Under/Over Temperature Limit Count: 0/0 | ||
+ | |||
+ | SCT Temperature History Version: 2 | ||
+ | Temperature Sampling Period: 3 minutes | ||
+ | Temperature Logging Interval: 59 minutes | ||
+ | Min/Max recommended Temperature: 10/40 Celsius | ||
+ | Min/Max Temperature Limit: 5/60 Celsius | ||
+ | Temperature History Size (Index): 128 (12) | ||
+ | |||
+ | Index Estimated Time Temperature Celsius | ||
+ | 13 2019-04-18 14:14 27 ******** | ||
+ | |||
+ | SCT Error Recovery Control: | ||
+ | Read: 100 (10.0 seconds) | ||
+ | Write: 100 (10.0 seconds) | ||
+ | |||
+ | Device Statistics (GP Log 0x04) | ||
+ | Page Offset Size Value Flags Description | ||
+ | 0x01 ===== = = === == General Statistics (rev 1) == | ||
+ | 0x01 0x008 4 1 --- Lifetime Power-On Resets | ||
+ | 0x01 0x010 4 767 --- Power-on Hours | ||
+ | 0x01 0x018 6 927745061 --- Logical Sectors Written | ||
+ | 0x01 0x020 6 25181361 --- Number of Write Commands | ||
+ | 0x01 0x028 6 1309602584 --- Logical Sectors Read | ||
+ | 0x01 0x030 6 66616129 --- Number of Read Commands | ||
+ | 0x01 0x038 6 - --- Date and Time TimeStamp | ||
+ | 0x03 ===== = = === == Rotating Media Statistics (rev 1) == | ||
+ | 0x03 0x008 4 2337644972 N-- Spindle Motor Power-on Hours | ||
+ | 0x03 0x010 4 2337644969 N-- Head Flying Hours | ||
+ | 0x03 0x018 4 36 --- Head Load Events | ||
+ | 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors | ||
+ | 0x03 0x028 4 0 --- Read Recovery Attempts | ||
+ | 0x03 0x030 4 0 --- Number of Mechanical Start Failures | ||
+ | 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors | ||
+ | 0x03 0x040 4 25 --- Number of High Priority Unload Events | ||
+ | 0x04 ===== = = === == General Errors Statistics (rev 1) == | ||
+ | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | ||
+ | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | ||
+ | 0x05 ===== = = === == Temperature Statistics (rev 1) == | ||
+ | 0x05 0x008 1 27 --- Current Temperature | ||
+ | 0x05 0x010 1 27 --- Average Short Term Temperature | ||
+ | 0x05 0x018 1 - --- Average Long Term Temperature | ||
+ | 0x05 0x020 1 29 --- Highest Temperature | ||
+ | 0x05 0x028 1 0 --- Lowest Temperature | ||
+ | 0x05 0x030 1 27 --- Highest Average Short Term Temperature | ||
+ | 0x05 0x038 1 24 --- Lowest Average Short Term Temperature | ||
+ | 0x05 0x040 1 - --- Highest Average Long Term Temperature | ||
+ | 0x05 0x048 1 - --- Lowest Average Long Term Temperature | ||
+ | 0x05 0x050 4 0 --- Time in Over-Temperature | ||
+ | 0x05 0x058 1 60 --- Specified Maximum Operating Temperature | ||
+ | 0x05 0x060 4 10 --- Time in Under-Temperature | ||
+ | 0x05 0x068 1 5 --- Specified Minimum Operating Temperature | ||
+ | 0x06 ===== = = === == Transport Statistics (rev 1) == | ||
+ | 0x06 0x008 4 2 --- Number of Hardware Resets | ||
+ | 0x06 0x010 4 0 --- Number of ASR Events | ||
+ | 0x06 0x018 4 0 --- Number of Interface CRC Errors | ||
+ | |||_ C monitored condition met | ||
+ | ||__ D supports DSN | ||
+ | |___ N normalized value | ||
+ | |||
+ | SATA Phy Event Counters (GP Log 0x11) | ||
+ | ID Size Value Description | ||
+ | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET | ||
0x0001 2 0 Command failed due to ICRC error | 0x0001 2 0 Command failed due to ICRC error | ||
0x0003 2 0 R_ERR response for device-to-host data FIS | 0x0003 2 0 R_ERR response for device-to-host data FIS | ||
Line 1,926: | Line 3,029: | ||
0x0001 4 0 Command failed due to ICRC error | 0x0001 4 0 Command failed due to ICRC error | ||
0x0002 4 0 R_ERR response for data FIS | 0x0002 4 0 R_ERR response for data FIS | ||
+ | </pre> | ||
+ | === Seagate Surveillance SV7 === | ||
+ | ==== ST3000VX006-1HH166 (3TB) ==== | ||
+ | <pre> | ||
+ | smartctl 6.4 2015-06-04 r4109 [i686-w64-mingw32-2012r2(64)] (sf-6.4-1) | ||
+ | Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | |||
+ | === START OF INFORMATION SECTION === | ||
+ | Device Model: ST3000VX006-1HH166 | ||
+ | Serial Number: W6A15S9Y | ||
+ | LU WWN Device Id: 5 000c50 0903c3e93 | ||
+ | Firmware Version: CV12 | ||
+ | User Capacity: 3,000,592,982,016 bytes [3.00 TB] | ||
+ | Sector Sizes: 512 bytes logical, 4096 bytes physical | ||
+ | Rotation Rate: 5900 rpm | ||
+ | Form Factor: 3.5 inches | ||
+ | Device is: Not in smartctl database [for details use: -P showall] | ||
+ | ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b | ||
+ | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | ||
+ | Local Time is: Tue Apr 23 20:21:02 2019 | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | AAM feature is: Unavailable | ||
+ | APM feature is: Unavailable | ||
+ | Rd look-ahead is: Enabled | ||
+ | Write cache is: Enabled | ||
+ | ATA Security is: Disabled, NOT FROZEN [SEC1] | ||
+ | Wt Cache Reorder: Enabled | ||
+ | |||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | |||
+ | General SMART Values: | ||
+ | Offline data collection status: (0x82) Offline data collection activity | ||
+ | was completed without error. | ||
+ | Auto Offline Data Collection: Enabled. | ||
+ | Self-test execution status: ( 0) The previous self-test routine completed | ||
+ | without error or no self-test has ever | ||
+ | been run. | ||
+ | Total time to complete Offline | ||
+ | data collection: ( 97) seconds. | ||
+ | Offline data collection | ||
+ | capabilities: (0x7b) SMART execute Offline immediate. | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: (0x0003) Saves SMART data before entering | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: (0x01) Error logging supported. | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 1) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: ( 374) minutes. | ||
+ | Conveyance self-test routine | ||
+ | recommended polling time: ( 2) minutes. | ||
+ | SCT capabilities: (0x10b9) SCT Status supported. | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | |||
+ | SMART Attributes Data Structure revision number: 10 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | ||
+ | 1 Raw_Read_Error_Rate POSR-- 120 099 006 - 235015752 | ||
+ | 3 Spin_Up_Time PO---- 093 093 000 - 0 | ||
+ | 4 Start_Stop_Count -O--CK 100 100 020 - 93 | ||
+ | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 | ||
+ | 7 Seek_Error_Rate POSR-- 071 060 030 - 12748038 | ||
+ | 9 Power_On_Hours -O--CK 074 074 000 - 23463 | ||
+ | 10 Spin_Retry_Count PO--C- 100 100 097 - 0 | ||
+ | 12 Power_Cycle_Count -O--CK 100 100 020 - 89 | ||
+ | 184 End-to-End_Error -O--CK 100 100 099 - 0 | ||
+ | 187 Reported_Uncorrect -O--CK 100 100 000 - 0 | ||
+ | 188 Command_Timeout -O--CK 100 100 000 - 0 | ||
+ | 189 High_Fly_Writes -O-RCK 058 058 000 - 42 | ||
+ | 190 Airflow_Temperature_Cel -O---K 065 056 045 - 35 (Min/Max 24/36) | ||
+ | 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 | ||
+ | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 50 | ||
+ | 193 Load_Cycle_Count -O--CK 100 100 000 - 150 | ||
+ | 194 Temperature_Celsius -O---K 035 044 000 - 35 (0 14 0 0 0) | ||
+ | 197 Current_Pending_Sector -O--C- 100 100 000 - 0 | ||
+ | 198 Offline_Uncorrectable ----C- 100 100 000 - 0 | ||
+ | 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 | ||
+ | ||||||_ K auto-keep | ||
+ | |||||__ C event count | ||
+ | ||||___ R error rate | ||
+ | |||____ S speed/performance | ||
+ | ||_____ O updated online | ||
+ | |______ P prefailure warning | ||
+ | |||
+ | General Purpose Log Directory Version 1 | ||
+ | SMART Log Directory Version 1 [multi-sector log support] | ||
+ | Address Access R/W Size Description | ||
+ | 0x00 GPL,SL R/O 1 Log Directory | ||
+ | 0x01 SL R/O 1 Summary SMART error log | ||
+ | 0x02 SL R/O 5 Comprehensive SMART error log | ||
+ | 0x03 GPL R/O 5 Ext. Comprehensive SMART error log | ||
+ | 0x06 SL R/O 1 SMART self-test log | ||
+ | 0x07 GPL R/O 1 Extended self-test log | ||
+ | 0x08 GPL,SL R/O 2 Power Conditions log | ||
+ | 0x09 SL R/W 1 Selective self-test log | ||
+ | 0x10 GPL R/O 1 SATA NCQ Queued Error log | ||
+ | 0x11 GPL R/O 1 SATA Phy Event Counters log | ||
+ | 0x21 GPL R/O 1 Write stream error log | ||
+ | 0x22 GPL R/O 1 Read stream error log | ||
+ | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | ||
+ | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log | ||
+ | 0xa1 GPL,SL VS 20 Device vendor specific log | ||
+ | 0xa2 GPL VS 4496 Device vendor specific log | ||
+ | 0xa8 GPL,SL VS 129 Device vendor specific log | ||
+ | 0xa9 GPL,SL VS 1 Device vendor specific log | ||
+ | 0xab GPL VS 1 Device vendor specific log | ||
+ | 0xb0 GPL VS 5176 Device vendor specific log | ||
+ | 0xbe-0xbf GPL VS 65535 Device vendor specific log | ||
+ | 0xc0 GPL,SL VS 1 Device vendor specific log | ||
+ | 0xc1 GPL,SL VS 10 Device vendor specific log | ||
+ | 0xc3 GPL,SL VS 8 Device vendor specific log | ||
+ | 0xc4 GPL,SL VS 5 Device vendor specific log | ||
+ | 0xd1 GPL,SL VS 8 Device vendor specific log | ||
+ | 0xe0 GPL,SL R/W 1 SCT Command/Status | ||
+ | 0xe1 GPL,SL R/W 1 SCT Data Transfer | ||
+ | |||
+ | SMART Extended Comprehensive Error Log Version: 1 (5 sectors) | ||
+ | No Errors Logged | ||
+ | |||
+ | SMART Extended Self-test Log Version: 1 (1 sectors) | ||
+ | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | ||
+ | # 1 Short offline Completed without error 00% 23446 - | ||
+ | # 2 Short offline Completed without error 00% 23374 - | ||
+ | # 3 Short offline Completed without error 00% 23278 - | ||
+ | # 4 Short offline Completed without error 00% 23206 - | ||
+ | # 5 Short offline Completed without error 00% 23110 - | ||
+ | # 6 Short offline Completed without error 00% 23038 - | ||
+ | # 7 Short offline Completed without error 00% 22942 - | ||
+ | # 8 Short offline Completed without error 00% 22870 - | ||
+ | # 9 Short offline Completed without error 00% 22774 - | ||
+ | #10 Short offline Completed without error 00% 22702 - | ||
+ | #11 Short offline Completed without error 00% 22606 - | ||
+ | #12 Short offline Completed without error 00% 22534 - | ||
+ | #13 Short offline Completed without error 00% 22438 - | ||
+ | #14 Short offline Completed without error 00% 22366 - | ||
+ | #15 Short offline Completed without error 00% 22270 - | ||
+ | #16 Short offline Completed without error 00% 22198 - | ||
+ | #17 Short offline Completed without error 00% 22102 - | ||
+ | #18 Short offline Completed without error 00% 22030 - | ||
+ | #19 Short offline Completed without error 00% 21934 - | ||
+ | |||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | |||
+ | SCT Status Version: 3 | ||
+ | SCT Version (vendor specific): 522 (0x020a) | ||
+ | SCT Support Level: 1 | ||
+ | Device State: Active (0) | ||
+ | Current Temperature: 35 Celsius | ||
+ | Power Cycle Min/Max Temperature: 24/36 Celsius | ||
+ | Lifetime Min/Max Temperature: 14/44 Celsius | ||
+ | Under/Over Temperature Limit Count: 0/0 | ||
+ | |||
+ | SCT Temperature History Version: 2 | ||
+ | Temperature Sampling Period: 1 minute | ||
+ | Temperature Logging Interval: 94 minutes | ||
+ | Min/Max recommended Temperature: 1/61 Celsius | ||
+ | Min/Max Temperature Limit: 2/60 Celsius | ||
+ | Temperature History Size (Index): 128 (53) | ||
+ | |||
+ | Index Estimated Time Temperature Celsius | ||
+ | 53 2019-04-23 19:40 35 **************** | ||
+ | |||
+ | SCT Error Recovery Control: | ||
+ | Read: 70 (7.0 seconds) | ||
+ | Write: 70 (7.0 seconds) | ||
+ | |||
+ | Device Statistics (GP/SMART Log 0x04) not supported | ||
+ | |||
+ | SATA Phy Event Counters (GP Log 0x11) | ||
+ | ID Size Value Description | ||
+ | 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET | ||
+ | 0x0001 2 0 Command failed due to ICRC error | ||
+ | 0x0003 2 0 R_ERR response for device-to-host data FIS | ||
+ | 0x0004 2 0 R_ERR response for host-to-device data FIS | ||
+ | 0x0006 2 0 R_ERR response for device-to-host non-data FIS | ||
+ | 0x0007 2 0 R_ERR response for host-to-device non-data FIS | ||
</pre> | </pre> | ||
Line 2,274: | Line 3,574: | ||
ID Size Value Description | ID Size Value Description | ||
0x0001 2 0 Command failed due to ICRC error | 0x0001 2 0 Command failed due to ICRC error | ||
+ | |||
+ | </pre> | ||
+ | |||
+ | === Toshiba DT01ACA200 2TB === | ||
+ | <pre> | ||
+ | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.13-2-pve] (local build) | ||
+ | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | |||
+ | === START OF INFORMATION SECTION === | ||
+ | Model Family: Toshiba 3.5" DT01ACA... Desktop HDD | ||
+ | Device Model: TOSHIBA DT01ACA200 | ||
+ | Serial Number: 25G9S09AT | ||
+ | LU WWN Device Id: 5 000039 ffaeeb43a | ||
+ | Firmware Version: MX4OABB0 | ||
+ | User Capacity: 2,000,398,934,016 bytes [2.00 TB] | ||
+ | Sector Sizes: 512 bytes logical, 4096 bytes physical | ||
+ | Rotation Rate: 7200 rpm | ||
+ | Form Factor: 3.5 inches | ||
+ | Device is: In smartctl database [for details use: -P show] | ||
+ | ATA Version is: ATA8-ACS T13/1699-D revision 4 | ||
+ | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) | ||
+ | Local Time is: Tue Apr 23 19:39:35 2019 CST | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | AAM feature is: Unavailable | ||
+ | APM feature is: Disabled | ||
+ | Rd look-ahead is: Enabled | ||
+ | Write cache is: Enabled | ||
+ | ATA Security is: Disabled, NOT FROZEN [SEC1] | ||
+ | Wt Cache Reorder: Enabled | ||
+ | |||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | |||
+ | General SMART Values: | ||
+ | Offline data collection status: (0x82) Offline data collection activity | ||
+ | was completed without error. | ||
+ | Auto Offline Data Collection: Enabled. | ||
+ | Self-test execution status: ( 41) The self-test routine was interrupted | ||
+ | by the host with a hard or soft reset. | ||
+ | Total time to complete Offline | ||
+ | data collection: (14822) seconds. | ||
+ | Offline data collection | ||
+ | capabilities: (0x5b) SMART execute Offline immediate. | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | No Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: (0x0003) Saves SMART data before entering | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: (0x01) Error logging supported. | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 1) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: ( 247) minutes. | ||
+ | SCT capabilities: (0x003d) SCT Status supported. | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | |||
+ | SMART Attributes Data Structure revision number: 16 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | ||
+ | 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 | ||
+ | 2 Throughput_Performance P-S--- 139 139 054 - 71 | ||
+ | 3 Spin_Up_Time POS--- 126 126 024 - 303 (Average 300) | ||
+ | 4 Start_Stop_Count -O--C- 100 100 000 - 60 | ||
+ | 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | ||
+ | 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | ||
+ | 8 Seek_Time_Performance P-S--- 124 124 020 - 33 | ||
+ | 9 Power_On_Hours -O--C- 096 096 000 - 31428 | ||
+ | 10 Spin_Retry_Count PO--C- 100 100 060 - 0 | ||
+ | 12 Power_Cycle_Count -O--CK 100 100 000 - 60 | ||
+ | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 256 | ||
+ | 193 Load_Cycle_Count -O--C- 100 100 000 - 256 | ||
+ | 194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 20/41) | ||
+ | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | ||
+ | 197 Current_Pending_Sector -O---K 100 100 000 - 0 | ||
+ | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | ||
+ | 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | ||
+ | ||||||_ K auto-keep | ||
+ | |||||__ C event count | ||
+ | ||||___ R error rate | ||
+ | |||____ S speed/performance | ||
+ | ||_____ O updated online | ||
+ | |______ P prefailure warning | ||
+ | |||
+ | General Purpose Log Directory Version 1 | ||
+ | SMART Log Directory Version 1 [multi-sector log support] | ||
+ | Address Access R/W Size Description | ||
+ | 0x00 GPL,SL R/O 1 Log Directory | ||
+ | 0x01 SL R/O 1 Summary SMART error log | ||
+ | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log | ||
+ | 0x04 GPL R/O 7 Device Statistics log | ||
+ | 0x06 SL R/O 1 SMART self-test log | ||
+ | 0x07 GPL R/O 1 Extended self-test log | ||
+ | 0x08 GPL R/O 2 Power Conditions log | ||
+ | 0x09 SL R/W 1 Selective self-test log | ||
+ | 0x10 GPL R/O 1 SATA NCQ Queued Error log | ||
+ | 0x11 GPL R/O 1 SATA Phy Event Counters log | ||
+ | 0x20 GPL R/O 1 Streaming performance log [OBS-8] | ||
+ | 0x21 GPL R/O 1 Write stream error log | ||
+ | 0x22 GPL R/O 1 Read stream error log | ||
+ | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log | ||
+ | 0xe0 GPL,SL R/W 1 SCT Command/Status | ||
+ | 0xe1 GPL,SL R/W 1 SCT Data Transfer | ||
+ | |||
+ | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | ||
+ | No Errors Logged | ||
+ | |||
+ | SMART Extended Self-test Log Version: 1 (1 sectors) | ||
+ | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | ||
+ | # 1 Short captive Interrupted (host reset) 90% 31067 - | ||
+ | |||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | |||
+ | SCT Status Version: 3 | ||
+ | SCT Version (vendor specific): 256 (0x0100) | ||
+ | SCT Support Level: 1 | ||
+ | Device State: Active (0) | ||
+ | Current Temperature: 30 Celsius | ||
+ | Power Cycle Min/Max Temperature: 22/33 Celsius | ||
+ | Lifetime Min/Max Temperature: 20/41 Celsius | ||
+ | Under/Over Temperature Limit Count: 0/0 | ||
+ | |||
+ | SCT Temperature History Version: 2 | ||
+ | Temperature Sampling Period: 1 minute | ||
+ | Temperature Logging Interval: 1 minute | ||
+ | Min/Max recommended Temperature: 0/60 Celsius | ||
+ | Min/Max Temperature Limit: -40/70 Celsius | ||
+ | Temperature History Size (Index): 128 (18) | ||
+ | |||
+ | Index Estimated Time Temperature Celsius | ||
+ | 19 2019-04-23 17:32 30 *********** | ||
+ | |||
+ | SCT Error Recovery Control: | ||
+ | Read: Disabled | ||
+ | Write: Disabled | ||
+ | |||
+ | Device Statistics (GP Log 0x04) | ||
+ | Page Offset Size Value Flags Description | ||
+ | 0x01 ===== = = === == General Statistics (rev 1) == | ||
+ | 0x01 0x008 4 60 --- Lifetime Power-On Resets | ||
+ | 0x01 0x010 4 31428 --- Power-on Hours | ||
+ | 0x01 0x018 6 41557643295 --- Logical Sectors Written | ||
+ | 0x01 0x020 6 213298856 --- Number of Write Commands | ||
+ | 0x01 0x028 6 176899145906 --- Logical Sectors Read | ||
+ | 0x01 0x030 6 957418350 --- Number of Read Commands | ||
+ | 0x03 ===== = = === == Rotating Media Statistics (rev 1) == | ||
+ | 0x03 0x008 4 31424 --- Spindle Motor Power-on Hours | ||
+ | 0x03 0x010 4 31424 --- Head Flying Hours | ||
+ | 0x03 0x018 4 256 --- Head Load Events | ||
+ | 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors | ||
+ | 0x03 0x028 4 0 --- Read Recovery Attempts | ||
+ | 0x03 0x030 4 6 --- Number of Mechanical Start Failures | ||
+ | 0x04 ===== = = === == General Errors Statistics (rev 1) == | ||
+ | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | ||
+ | 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion | ||
+ | 0x05 ===== = = === == Temperature Statistics (rev 1) == | ||
+ | 0x05 0x008 1 31 --- Current Temperature | ||
+ | 0x05 0x010 1 30 N-- Average Short Term Temperature | ||
+ | 0x05 0x018 1 29 N-- Average Long Term Temperature | ||
+ | 0x05 0x020 1 41 --- Highest Temperature | ||
+ | 0x05 0x028 1 20 --- Lowest Temperature | ||
+ | 0x05 0x030 1 36 N-- Highest Average Short Term Temperature | ||
+ | 0x05 0x038 1 24 N-- Lowest Average Short Term Temperature | ||
+ | 0x05 0x040 1 32 N-- Highest Average Long Term Temperature | ||
+ | 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature | ||
+ | 0x05 0x050 4 0 --- Time in Over-Temperature | ||
+ | 0x05 0x058 1 60 --- Specified Maximum Operating Temperature | ||
+ | 0x05 0x060 4 0 --- Time in Under-Temperature | ||
+ | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature | ||
+ | 0x06 ===== = = === == Transport Statistics (rev 1) == | ||
+ | 0x06 0x008 4 780 --- Number of Hardware Resets | ||
+ | 0x06 0x010 4 134 --- Number of ASR Events | ||
+ | 0x06 0x018 4 0 --- Number of Interface CRC Errors | ||
+ | |||_ C monitored condition met | ||
+ | ||__ D supports DSN | ||
+ | |___ N normalized value | ||
+ | |||
+ | SATA Phy Event Counters (GP Log 0x11) | ||
+ | ID Size Value Description | ||
+ | 0x0001 2 0 Command failed due to ICRC error | ||
+ | 0x0002 2 0 R_ERR response for data FIS | ||
+ | 0x0003 2 0 R_ERR response for device-to-host data FIS | ||
+ | 0x0004 2 0 R_ERR response for host-to-device data FIS | ||
+ | 0x0005 2 0 R_ERR response for non-data FIS | ||
+ | 0x0006 2 0 R_ERR response for device-to-host non-data FIS | ||
+ | 0x0007 2 0 R_ERR response for host-to-device non-data FIS | ||
+ | 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy | ||
+ | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | ||
+ | 0x000b 2 0 CRC errors within host-to-device FIS | ||
+ | 0x000d 2 0 Non-CRC errors within host-to-device FIS | ||
+ | </pre> | ||
+ | |||
+ | === Toshiba MD04ABA400V 4TB === | ||
+ | |||
+ | <pre> | ||
+ | smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.0-STABLE amd64] (local build) | ||
+ | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | |||
+ | === START OF INFORMATION SECTION === | ||
+ | Device Model: TOSHIBA MD04ABA400V | ||
+ | Serial Number: 47K4KF71FMYC | ||
+ | LU WWN Device Id: 5 000039 7bb881feb | ||
+ | Firmware Version: FP1T | ||
+ | User Capacity: 4,000,787,030,016 bytes [4.00 TB] | ||
+ | Sector Sizes: 512 bytes logical, 4096 bytes physical | ||
+ | Rotation Rate: 5400 rpm | ||
+ | Form Factor: 3.5 inches | ||
+ | Device is: Not in smartctl database [for details use: -P showall] | ||
+ | ATA Version is: ATA8-ACS (minor revision not indicated) | ||
+ | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) | ||
+ | Local Time is: Tue Apr 23 19:44:38 2019 CST | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | AAM feature is: Unavailable | ||
+ | APM feature is: Disabled | ||
+ | Rd look-ahead is: Enabled | ||
+ | Write cache is: Enabled | ||
+ | ATA Security is: Disabled, NOT FROZEN [SEC1] | ||
+ | Wt Cache Reorder: Enabled | ||
+ | |||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | |||
+ | General SMART Values: | ||
+ | Offline data collection status: (0x82) Offline data collection activity | ||
+ | was completed without error. | ||
+ | Auto Offline Data Collection: Enabled. | ||
+ | Self-test execution status: ( 0) The previous self-test routine completed | ||
+ | without error or no self-test has ever | ||
+ | been run. | ||
+ | Total time to complete Offline | ||
+ | data collection: ( 120) seconds. | ||
+ | Offline data collection | ||
+ | capabilities: (0x5b) SMART execute Offline immediate. | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | No Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: (0x0003) Saves SMART data before entering | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: (0x01) Error logging supported. | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 2) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: ( 535) minutes. | ||
+ | SCT capabilities: (0x003d) SCT Status supported. | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | |||
+ | SMART Attributes Data Structure revision number: 16 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | ||
+ | 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 | ||
+ | 2 Throughput_Performance P-S--- 100 100 050 - 0 | ||
+ | 3 Spin_Up_Time POS--K 100 100 001 - 5175 | ||
+ | 4 Start_Stop_Count -O--CK 100 100 000 - 59 | ||
+ | 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 | ||
+ | 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 | ||
+ | 8 Seek_Time_Performance P-S--- 100 100 050 - 0 | ||
+ | 9 Power_On_Hours -O--CK 062 062 000 - 15487 | ||
+ | 10 Spin_Retry_Count PO--CK 101 100 030 - 0 | ||
+ | 12 Power_Cycle_Count -O--CK 100 100 000 - 59 | ||
+ | 191 G-Sense_Error_Rate -O--CK 100 100 000 - 19 | ||
+ | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 47 | ||
+ | 193 Load_Cycle_Count -O--CK 100 100 000 - 60 | ||
+ | 194 Temperature_Celsius -O---K 100 100 000 - 25 (Min/Max 9/37) | ||
+ | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | ||
+ | 197 Current_Pending_Sector -O--CK 100 100 000 - 0 | ||
+ | 198 Offline_Uncorrectable ----CK 100 100 000 - 0 | ||
+ | 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | ||
+ | 220 Disk_Shift -O---- 100 100 000 - 0 | ||
+ | 222 Loaded_Hours -O--CK 062 062 000 - 15459 | ||
+ | 223 Load_Retry_Count -O--CK 100 100 000 - 0 | ||
+ | 224 Load_Friction -O---K 100 100 000 - 0 | ||
+ | 226 Load-in_Time -OS--K 100 100 000 - 718 | ||
+ | 240 Head_Flying_Hours P----- 100 100 001 - 0 | ||
+ | ||||||_ K auto-keep | ||
+ | |||||__ C event count | ||
+ | ||||___ R error rate | ||
+ | |||____ S speed/performance | ||
+ | ||_____ O updated online | ||
+ | |______ P prefailure warning | ||
+ | |||
+ | General Purpose Log Directory Version 1 | ||
+ | SMART Log Directory Version 1 [multi-sector log support] | ||
+ | Address Access R/W Size Description | ||
+ | 0x00 GPL,SL R/O 1 Log Directory | ||
+ | 0x01 SL R/O 1 Summary SMART error log | ||
+ | 0x02 SL R/O 51 Comprehensive SMART error log | ||
+ | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log | ||
+ | 0x04 GPL,SL R/O 8 Device Statistics log | ||
+ | 0x06 SL R/O 1 SMART self-test log | ||
+ | 0x07 GPL R/O 1 Extended self-test log | ||
+ | 0x08 GPL R/O 2 Power Conditions log | ||
+ | 0x09 SL R/W 1 Selective self-test log | ||
+ | 0x10 GPL R/O 1 SATA NCQ Queued Error log | ||
+ | 0x11 GPL R/O 1 SATA Phy Event Counters log | ||
+ | 0x24 GPL R/O 12288 Current Device Internal Status Data log | ||
+ | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | ||
+ | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log | ||
+ | 0xa7 GPL VS 8 Device vendor specific log | ||
+ | 0xe0 GPL,SL R/W 1 SCT Command/Status | ||
+ | 0xe1 GPL,SL R/W 1 SCT Data Transfer | ||
+ | |||
+ | SMART Extended Comprehensive Error Log Version: 1 (64 sectors) | ||
+ | No Errors Logged | ||
+ | |||
+ | SMART Extended Self-test Log Version: 1 (1 sectors) | ||
+ | No self-tests have been logged. [To run self-tests, use: smartctl -t] | ||
+ | |||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | |||
+ | SCT Status Version: 3 | ||
+ | SCT Version (vendor specific): 1 (0x0001) | ||
+ | SCT Support Level: 1 | ||
+ | Device State: Active (0) | ||
+ | Current Temperature: 25 Celsius | ||
+ | Power Cycle Min/Max Temperature: 12/33 Celsius | ||
+ | Lifetime Min/Max Temperature: 9/37 Celsius | ||
+ | Under/Over Temperature Limit Count: 0/0 | ||
+ | |||
+ | SCT Temperature History Version: 2 | ||
+ | Temperature Sampling Period: 1 minute | ||
+ | Temperature Logging Interval: 1 minute | ||
+ | Min/Max recommended Temperature: 5/55 Celsius | ||
+ | Min/Max Temperature Limit: 5/55 Celsius | ||
+ | Temperature History Size (Index): 478 (202) | ||
+ | |||
+ | Index Estimated Time Temperature Celsius | ||
+ | 203 2019-04-23 11:47 32 ************* | ||
+ | |||
+ | Unexpected SCT status 0x0000 (action_code=2, function_code=1) | ||
+ | SCT (Get) Error Recovery Control command failed | ||
+ | |||
+ | Device Statistics (GP Log 0x04) | ||
+ | Page Offset Size Value Flags Description | ||
+ | 0x01 ===== = = === == General Statistics (rev 2) == | ||
+ | 0x01 0x008 4 59 --- Lifetime Power-On Resets | ||
+ | 0x01 0x010 4 15487 --- Power-on Hours | ||
+ | 0x01 0x018 6 39771618341 --- Logical Sectors Written | ||
+ | 0x01 0x020 6 443045202 --- Number of Write Commands | ||
+ | 0x01 0x028 6 57633638178 --- Logical Sectors Read | ||
+ | 0x01 0x030 6 549986646 --- Number of Read Commands | ||
+ | 0x02 ===== = = === == Free-Fall Statistics (rev 1) == | ||
+ | 0x02 0x010 4 19 --- Overlimit Shock Events | ||
+ | 0x03 ===== = = === == Rotating Media Statistics (rev 1) == | ||
+ | 0x03 0x008 4 15486 --- Spindle Motor Power-on Hours | ||
+ | 0x03 0x010 4 15459 --- Head Flying Hours | ||
+ | 0x03 0x018 4 60 --- Head Load Events | ||
+ | 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors | ||
+ | 0x03 0x028 4 1 --- Read Recovery Attempts | ||
+ | 0x03 0x030 4 0 --- Number of Mechanical Start Failures | ||
+ | 0x04 ===== = = === == General Errors Statistics (rev 1) == | ||
+ | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | ||
+ | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | ||
+ | 0x05 ===== = = === == Temperature Statistics (rev 1) == | ||
+ | 0x05 0x008 1 25 --- Current Temperature | ||
+ | 0x05 0x010 1 31 N-- Average Short Term Temperature | ||
+ | 0x05 0x018 1 27 N-- Average Long Term Temperature | ||
+ | 0x05 0x020 1 37 --- Highest Temperature | ||
+ | 0x05 0x028 1 9 --- Lowest Temperature | ||
+ | 0x05 0x030 1 34 N-- Highest Average Short Term Temperature | ||
+ | 0x05 0x038 1 14 N-- Lowest Average Short Term Temperature | ||
+ | 0x05 0x040 1 31 N-- Highest Average Long Term Temperature | ||
+ | 0x05 0x048 1 20 N-- Lowest Average Long Term Temperature | ||
+ | 0x05 0x050 4 0 --- Time in Over-Temperature | ||
+ | 0x05 0x058 1 55 --- Specified Maximum Operating Temperature | ||
+ | 0x05 0x060 4 0 --- Time in Under-Temperature | ||
+ | 0x05 0x068 1 5 --- Specified Minimum Operating Temperature | ||
+ | 0x06 ===== = = === == Transport Statistics (rev 1) == | ||
+ | 0x06 0x008 4 6585 --- Number of Hardware Resets | ||
+ | 0x06 0x018 4 0 --- Number of Interface CRC Errors | ||
+ | 0x07 ===== = = === == Solid State Device Statistics (rev 1) == | ||
+ | |||_ C monitored condition met | ||
+ | ||__ D supports DSN | ||
+ | |___ N normalized value | ||
+ | |||
+ | SATA Phy Event Counters (GP Log 0x11) | ||
+ | ID Size Value Description | ||
+ | 0x0001 4 0 Command failed due to ICRC error | ||
+ | 0x0002 4 1 R_ERR response for data FIS | ||
+ | 0x0003 4 0 R_ERR response for device-to-host data FIS | ||
+ | 0x0004 4 1 R_ERR response for host-to-device data FIS | ||
+ | 0x0005 4 0 R_ERR response for non-data FIS | ||
+ | 0x0006 4 0 R_ERR response for device-to-host non-data FIS | ||
+ | 0x0007 4 0 R_ERR response for host-to-device non-data FIS | ||
+ | 0x0008 4 0 Device-to-host non-data FIS retries | ||
+ | 0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy | ||
+ | 0x000a 4 130 Device-to-host register FISes sent due to a COMRESET | ||
+ | 0x000b 4 1 CRC errors within host-to-device FIS | ||
+ | 0x000d 4 0 Non-CRC errors within host-to-device FIS | ||
+ | 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC | ||
+ | 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC | ||
+ | 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC | ||
+ | 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC | ||
+ | </pre> | ||
+ | |||
+ | === Toshiba MG05ACA800E 8TB === | ||
+ | |||
+ | <pre> | ||
+ | smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build) | ||
+ | Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | |||
+ | === START OF INFORMATION SECTION === | ||
+ | Device Model: TOSHIBA MG05ACA800E | ||
+ | Serial Number: Y7SBK2JWF56F | ||
+ | LU WWN Device Id: 5 000039 82bc026a4 | ||
+ | Firmware Version: GX4K | ||
+ | User Capacity: 8,001,563,222,016 bytes [8.00 TB] | ||
+ | Sector Sizes: 512 bytes logical, 4096 bytes physical | ||
+ | Rotation Rate: 7200 rpm | ||
+ | Form Factor: 3.5 inches | ||
+ | Device is: Not in smartctl database [for details use: -P showall] | ||
+ | ATA Version is: ACS-3 T13/2161-D revision 5 | ||
+ | SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) | ||
+ | Local Time is: Tue Apr 23 19:47:57 2019 CST | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | AAM feature is: Unavailable | ||
+ | APM feature is: Disabled | ||
+ | Rd look-ahead is: Enabled | ||
+ | Write cache is: Enabled | ||
+ | DSN feature is: Disabled | ||
+ | ATA Security is: Disabled, NOT FROZEN [SEC1] | ||
+ | Wt Cache Reorder: Enabled | ||
+ | |||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | |||
+ | General SMART Values: | ||
+ | Offline data collection status: (0x84) Offline data collection activity | ||
+ | was suspended by an interrupting command from host. | ||
+ | Auto Offline Data Collection: Enabled. | ||
+ | Self-test execution status: ( 0) The previous self-test routine completed | ||
+ | without error or no self-test has ever | ||
+ | been run. | ||
+ | Total time to complete Offline | ||
+ | data collection: ( 120) seconds. | ||
+ | Offline data collection | ||
+ | capabilities: (0x5b) SMART execute Offline immediate. | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | No Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: (0x0003) Saves SMART data before entering | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: (0x01) Error logging supported. | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 2) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: ( 778) minutes. | ||
+ | SCT capabilities: (0x003d) SCT Status supported. | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | |||
+ | SMART Attributes Data Structure revision number: 16 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | ||
+ | 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 | ||
+ | 2 Throughput_Performance P-S--- 100 100 050 - 0 | ||
+ | 3 Spin_Up_Time POS--K 100 100 001 - 15812 | ||
+ | 4 Start_Stop_Count -O--CK 100 100 000 - 11 | ||
+ | 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 | ||
+ | 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 | ||
+ | 8 Seek_Time_Performance P-S--- 100 100 050 - 0 | ||
+ | 9 Power_On_Hours -O--CK 075 075 000 - 10282 | ||
+ | 10 Spin_Retry_Count PO--CK 100 100 030 - 0 | ||
+ | 12 Power_Cycle_Count -O--CK 100 100 000 - 11 | ||
+ | 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 | ||
+ | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 9 | ||
+ | 193 Load_Cycle_Count -O--CK 100 100 000 - 18 | ||
+ | 194 Temperature_Celsius -O---K 100 100 000 - 33 (Min/Max 15/47) | ||
+ | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | ||
+ | 197 Current_Pending_Sector -O--CK 100 100 000 - 0 | ||
+ | 198 Offline_Uncorrectable ----CK 100 100 000 - 0 | ||
+ | 199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 | ||
+ | 220 Disk_Shift -O---- 100 100 000 - 0 | ||
+ | 222 Loaded_Hours -O--CK 075 075 000 - 10281 | ||
+ | 223 Load_Retry_Count -O--CK 100 100 000 - 0 | ||
+ | 224 Load_Friction -O---K 100 100 000 - 0 | ||
+ | 226 Load-in_Time -OS--K 100 100 000 - 651 | ||
+ | 240 Head_Flying_Hours P----- 100 100 001 - 0 | ||
+ | ||||||_ K auto-keep | ||
+ | |||||__ C event count | ||
+ | ||||___ R error rate | ||
+ | |||____ S speed/performance | ||
+ | ||_____ O updated online | ||
+ | |______ P prefailure warning | ||
+ | |||
+ | General Purpose Log Directory Version 1 | ||
+ | SMART Log Directory Version 1 [multi-sector log support] | ||
+ | Address Access R/W Size Description | ||
+ | 0x00 GPL,SL R/O 1 Log Directory | ||
+ | 0x01 SL R/O 1 Summary SMART error log | ||
+ | 0x02 SL R/O 51 Comprehensive SMART error log | ||
+ | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log | ||
+ | 0x04 GPL,SL R/O 8 Device Statistics log | ||
+ | 0x06 SL R/O 1 SMART self-test log | ||
+ | 0x07 GPL R/O 1 Extended self-test log | ||
+ | 0x08 GPL R/O 2 Power Conditions log | ||
+ | 0x09 SL R/W 1 Selective self-test log | ||
+ | 0x0a GPL R/W 2 Device Statistics Notification | ||
+ | 0x0c GPL R/O 2048 Pending Defects log | ||
+ | 0x10 GPL R/O 1 NCQ Command Error log | ||
+ | 0x11 GPL R/O 1 SATA Phy Event Counters log | ||
+ | 0x24 GPL R/O 16384 Current Device Internal Status Data log | ||
+ | 0x25 GPL R/O 16384 Saved Device Internal Status Data log | ||
+ | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | ||
+ | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log | ||
+ | 0xa7 GPL VS 8 Device vendor specific log | ||
+ | 0xe0 GPL,SL R/W 1 SCT Command/Status | ||
+ | 0xe1 GPL,SL R/W 1 SCT Data Transfer | ||
+ | |||
+ | SMART Extended Comprehensive Error Log Version: 1 (64 sectors) | ||
+ | No Errors Logged | ||
+ | |||
+ | SMART Extended Self-test Log Version: 1 (1 sectors) | ||
+ | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | ||
+ | # 1 Short offline Completed without error 00% 10193 - | ||
+ | # 2 Short offline Completed without error 00% 9953 - | ||
+ | # 3 Short offline Completed without error 00% 9689 - | ||
+ | # 4 Short offline Completed without error 00% 9449 - | ||
+ | # 5 Short offline Completed without error 00% 9209 - | ||
+ | # 6 Short offline Completed without error 00% 8777 - | ||
+ | # 7 Short offline Completed without error 00% 8537 - | ||
+ | # 8 Short offline Completed without error 00% 8273 - | ||
+ | # 9 Short offline Completed without error 00% 8033 - | ||
+ | #10 Short offline Completed without error 00% 7793 - | ||
+ | #11 Short offline Completed without error 00% 7529 - | ||
+ | #12 Short offline Completed without error 00% 7289 - | ||
+ | #13 Short offline Completed without error 00% 7049 - | ||
+ | #14 Short offline Completed without error 00% 6809 - | ||
+ | #15 Short offline Completed without error 00% 6570 - | ||
+ | #16 Short offline Completed without error 00% 6330 - | ||
+ | #17 Short offline Completed without error 00% 6066 - | ||
+ | #18 Short offline Completed without error 00% 5826 - | ||
+ | #19 Short offline Completed without error 00% 5586 - | ||
+ | |||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | |||
+ | SCT Status Version: 3 | ||
+ | SCT Version (vendor specific): 1 (0x0001) | ||
+ | SCT Support Level: 1 | ||
+ | Device State: SMART Off-line Data Collection executing in background (4) | ||
+ | Current Temperature: 32 Celsius | ||
+ | Power Cycle Min/Max Temperature: 27/36 Celsius | ||
+ | Lifetime Min/Max Temperature: 15/47 Celsius | ||
+ | Under/Over Temperature Limit Count: 0/0 | ||
+ | |||
+ | SCT Temperature History Version: 2 | ||
+ | Temperature Sampling Period: 1 minute | ||
+ | Temperature Logging Interval: 1 minute | ||
+ | Min/Max recommended Temperature: 5/55 Celsius | ||
+ | Min/Max Temperature Limit: 5/55 Celsius | ||
+ | Temperature History Size (Index): 478 (418) | ||
+ | |||
+ | Index Estimated Time Temperature Celsius | ||
+ | 419 2019-04-23 11:50 33 ************** | ||
+ | |||
+ | SCT Error Recovery Control: | ||
+ | Read: Disabled | ||
+ | Write: Disabled | ||
+ | |||
+ | Device Statistics (GP Log 0x04) | ||
+ | Page Offset Size Value Flags Description | ||
+ | 0x01 ===== = = === == General Statistics (rev 1) == | ||
+ | 0x01 0x008 4 11 --- Lifetime Power-On Resets | ||
+ | 0x01 0x010 4 10282 --- Power-on Hours | ||
+ | 0x01 0x018 6 14436451156 --- Logical Sectors Written | ||
+ | 0x01 0x020 6 142223482 --- Number of Write Commands | ||
+ | 0x01 0x028 6 103102206648 --- Logical Sectors Read | ||
+ | 0x01 0x030 6 1087302114 --- Number of Read Commands | ||
+ | 0x01 0x038 6 37015210380 --- Date and Time TimeStamp | ||
+ | 0x02 ===== = = === == Free-Fall Statistics (rev 1) == | ||
+ | 0x02 0x010 4 0 --- Overlimit Shock Events | ||
+ | 0x03 ===== = = === == Rotating Media Statistics (rev 1) == | ||
+ | 0x03 0x008 4 10281 --- Spindle Motor Power-on Hours | ||
+ | 0x03 0x010 4 10281 --- Head Flying Hours | ||
+ | 0x03 0x018 4 18 --- Head Load Events | ||
+ | 0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors | ||
+ | 0x03 0x028 4 2 --- Read Recovery Attempts | ||
+ | 0x03 0x030 4 0 --- Number of Mechanical Start Failures | ||
+ | 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors | ||
+ | 0x03 0x040 4 9 --- Number of High Priority Unload Events | ||
+ | 0x04 ===== = = === == General Errors Statistics (rev 1) == | ||
+ | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | ||
+ | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | ||
+ | 0x05 ===== = = === == Temperature Statistics (rev 1) == | ||
+ | 0x05 0x008 1 33 --- Current Temperature | ||
+ | 0x05 0x010 1 33 N-- Average Short Term Temperature | ||
+ | 0x05 0x018 1 31 N-- Average Long Term Temperature | ||
+ | 0x05 0x020 1 47 --- Highest Temperature | ||
+ | 0x05 0x028 1 15 --- Lowest Temperature | ||
+ | 0x05 0x030 1 41 N-- Highest Average Short Term Temperature | ||
+ | 0x05 0x038 1 27 N-- Lowest Average Short Term Temperature | ||
+ | 0x05 0x040 1 38 N-- Highest Average Long Term Temperature | ||
+ | 0x05 0x048 1 29 N-- Lowest Average Long Term Temperature | ||
+ | 0x05 0x050 4 0 --- Time in Over-Temperature | ||
+ | 0x05 0x058 1 55 --- Specified Maximum Operating Temperature | ||
+ | 0x05 0x060 4 0 --- Time in Under-Temperature | ||
+ | 0x05 0x068 1 5 --- Specified Minimum Operating Temperature | ||
+ | 0x06 ===== = = === == Transport Statistics (rev 1) == | ||
+ | 0x06 0x008 4 394 --- Number of Hardware Resets | ||
+ | 0x06 0x010 4 27 --- Number of ASR Events | ||
+ | 0x06 0x018 4 0 --- Number of Interface CRC Errors | ||
+ | 0x07 ===== = = === == Solid State Device Statistics (rev 1) == | ||
+ | |||_ C monitored condition met | ||
+ | ||__ D supports DSN | ||
+ | |___ N normalized value | ||
+ | |||
+ | Pending Defects log (GP Log 0x0c) supported [please try: '-l defects'] | ||
+ | |||
+ | SATA Phy Event Counters (GP Log 0x11) | ||
+ | ID Size Value Description | ||
+ | 0x0001 4 0 Command failed due to ICRC error | ||
+ | 0x0002 4 0 R_ERR response for data FIS | ||
+ | 0x0003 4 0 R_ERR response for device-to-host data FIS | ||
+ | 0x0004 4 0 R_ERR response for host-to-device data FIS | ||
+ | 0x0005 4 0 R_ERR response for non-data FIS | ||
+ | 0x0006 4 0 R_ERR response for device-to-host non-data FIS | ||
+ | 0x0007 4 0 R_ERR response for host-to-device non-data FIS | ||
+ | 0x0008 4 0 Device-to-host non-data FIS retries | ||
+ | 0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy | ||
+ | 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET | ||
+ | 0x000b 4 0 CRC errors within host-to-device FIS | ||
+ | 0x000d 4 0 Non-CRC errors within host-to-device FIS | ||
+ | 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC | ||
+ | 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC | ||
+ | 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC | ||
+ | 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC | ||
+ | </pre> | ||
+ | |||
+ | === Toshiba DT01ABA300V 3TB === | ||
+ | |||
+ | <pre> | ||
+ | smartctl 6.4 2015-06-04 r4109 [i686-w64-mingw32-2012r2(64)] (sf-6.4-1) | ||
+ | Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | |||
+ | === START OF INFORMATION SECTION === | ||
+ | Device Model: TOSHIBA DT01ABA300V | ||
+ | Serial Number: 36UZZG5GT | ||
+ | LU WWN Device Id: 5 000039 fe3ce1577 | ||
+ | Firmware Version: MZ6OABB0 | ||
+ | User Capacity: 3,000,592,982,016 bytes [3.00 TB] | ||
+ | Sector Sizes: 512 bytes logical, 4096 bytes physical | ||
+ | Rotation Rate: 5940 rpm | ||
+ | Form Factor: 3.5 inches | ||
+ | Device is: Not in smartctl database [for details use: -P showall] | ||
+ | ATA Version is: ATA8-ACS T13/1699-D revision 4 | ||
+ | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | ||
+ | Local Time is: Tue Apr 23 20:21:07 2019 | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | AAM feature is: Unavailable | ||
+ | APM feature is: Disabled | ||
+ | Rd look-ahead is: Enabled | ||
+ | Write cache is: Enabled | ||
+ | ATA Security is: Disabled, NOT FROZEN [SEC1] | ||
+ | Wt Cache Reorder: Enabled | ||
+ | |||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | |||
+ | General SMART Values: | ||
+ | Offline data collection status: (0x00) Offline data collection activity | ||
+ | was never started. | ||
+ | Auto Offline Data Collection: Disabled. | ||
+ | Self-test execution status: ( 0) The previous self-test routine completed | ||
+ | without error or no self-test has ever | ||
+ | been run. | ||
+ | Total time to complete Offline | ||
+ | data collection: (26282) seconds. | ||
+ | Offline data collection | ||
+ | capabilities: (0x5b) SMART execute Offline immediate. | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | No Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: (0x0003) Saves SMART data before entering | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: (0x01) Error logging supported. | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 1) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: ( 438) minutes. | ||
+ | SCT capabilities: (0x003d) SCT Status supported. | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | |||
+ | SMART Attributes Data Structure revision number: 16 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | ||
+ | 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 | ||
+ | 2 Throughput_Performance P-S--- 100 100 054 - 0 | ||
+ | 3 Spin_Up_Time POS--- 133 133 024 - 411 (Average 410) | ||
+ | 4 Start_Stop_Count -O--C- 100 100 000 - 54 | ||
+ | 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | ||
+ | 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | ||
+ | 8 Seek_Time_Performance P-S--- 100 100 020 - 0 | ||
+ | 9 Power_On_Hours -O--C- 097 097 000 - 23021 | ||
+ | 10 Spin_Retry_Count PO--C- 100 100 060 - 0 | ||
+ | 12 Power_Cycle_Count -O--CK 100 100 000 - 54 | ||
+ | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 54 | ||
+ | 193 Load_Cycle_Count -O--C- 100 100 000 - 54 | ||
+ | 194 Temperature_Celsius -O---- 162 162 000 - 37 (Min/Max 17/41) | ||
+ | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | ||
+ | 197 Current_Pending_Sector -O---K 100 100 000 - 0 | ||
+ | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | ||
+ | 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | ||
+ | ||||||_ K auto-keep | ||
+ | |||||__ C event count | ||
+ | ||||___ R error rate | ||
+ | |||____ S speed/performance | ||
+ | ||_____ O updated online | ||
+ | |______ P prefailure warning | ||
+ | |||
+ | General Purpose Log Directory Version 1 | ||
+ | SMART Log Directory Version 1 [multi-sector log support] | ||
+ | Address Access R/W Size Description | ||
+ | 0x00 GPL,SL R/O 1 Log Directory | ||
+ | 0x01 SL R/O 1 Summary SMART error log | ||
+ | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log | ||
+ | 0x04 GPL R/O 7 Device Statistics log | ||
+ | 0x06 SL R/O 1 SMART self-test log | ||
+ | 0x07 GPL R/O 1 Extended self-test log | ||
+ | 0x08 GPL R/O 2 Power Conditions log | ||
+ | 0x09 SL R/W 1 Selective self-test log | ||
+ | 0x10 GPL R/O 1 SATA NCQ Queued Error log | ||
+ | 0x11 GPL R/O 1 SATA Phy Event Counters log | ||
+ | 0x20 GPL R/O 1 Streaming performance log [OBS-8] | ||
+ | 0x21 GPL R/O 1 Write stream error log | ||
+ | 0x22 GPL R/O 1 Read stream error log | ||
+ | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log | ||
+ | 0xe0 GPL,SL R/W 1 SCT Command/Status | ||
+ | 0xe1 GPL,SL R/W 1 SCT Data Transfer | ||
+ | |||
+ | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | ||
+ | No Errors Logged | ||
+ | |||
+ | SMART Extended Self-test Log Version: 1 (1 sectors) | ||
+ | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | ||
+ | # 1 Short offline Completed without error 00% 23004 - | ||
+ | # 2 Short offline Completed without error 00% 22932 - | ||
+ | # 3 Short offline Completed without error 00% 22836 - | ||
+ | # 4 Short offline Completed without error 00% 22764 - | ||
+ | # 5 Short offline Completed without error 00% 22668 - | ||
+ | # 6 Short offline Completed without error 00% 22596 - | ||
+ | # 7 Short offline Completed without error 00% 22500 - | ||
+ | # 8 Short offline Completed without error 00% 22428 - | ||
+ | # 9 Short offline Completed without error 00% 22332 - | ||
+ | #10 Short offline Completed without error 00% 22260 - | ||
+ | #11 Short offline Completed without error 00% 22164 - | ||
+ | #12 Short offline Completed without error 00% 22092 - | ||
+ | #13 Short offline Completed without error 00% 21996 - | ||
+ | #14 Short offline Completed without error 00% 21924 - | ||
+ | #15 Short offline Completed without error 00% 21828 - | ||
+ | #16 Short offline Completed without error 00% 21756 - | ||
+ | #17 Short offline Completed without error 00% 21660 - | ||
+ | #18 Short offline Completed without error 00% 21588 - | ||
+ | #19 Short offline Completed without error 00% 21492 - | ||
+ | |||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | |||
+ | SCT Status Version: 3 | ||
+ | SCT Version (vendor specific): 256 (0x0100) | ||
+ | SCT Support Level: 1 | ||
+ | Device State: Active (0) | ||
+ | Current Temperature: 37 Celsius | ||
+ | Power Cycle Min/Max Temperature: 28/39 Celsius | ||
+ | Lifetime Min/Max Temperature: 17/41 Celsius | ||
+ | Under/Over Temperature Limit Count: 0/0 | ||
+ | |||
+ | SCT Temperature History Version: 2 | ||
+ | Temperature Sampling Period: 1 minute | ||
+ | Temperature Logging Interval: 1 minute | ||
+ | Min/Max recommended Temperature: 0/60 Celsius | ||
+ | Min/Max Temperature Limit: -40/70 Celsius | ||
+ | Temperature History Size (Index): 128 (92) | ||
+ | |||
+ | Index Estimated Time Temperature Celsius | ||
+ | 93 2019-04-23 18:14 37 ****************** | ||
+ | ... ..(126 skipped). .. ****************** | ||
+ | 92 2019-04-23 20:21 37 ****************** | ||
+ | |||
+ | SCT Error Recovery Control: | ||
+ | Read: Disabled | ||
+ | Write: Disabled | ||
+ | |||
+ | Device Statistics (GP Log 0x04) | ||
+ | Page Offset Size Value Flags Description | ||
+ | 0x01 ===== = = === == General Statistics (rev 1) == | ||
+ | 0x01 0x008 4 54 --- Lifetime Power-On Resets | ||
+ | 0x01 0x010 4 23021 --- Power-on Hours | ||
+ | 0x01 0x018 6 18585472380 --- Logical Sectors Written | ||
+ | 0x01 0x020 6 27340427 --- Number of Write Commands | ||
+ | 0x01 0x028 6 65461806928 --- Logical Sectors Read | ||
+ | 0x01 0x030 6 302167323 --- Number of Read Commands | ||
+ | 0x03 ===== = = === == Rotating Media Statistics (rev 1) == | ||
+ | 0x03 0x008 4 23017 --- Spindle Motor Power-on Hours | ||
+ | 0x03 0x010 4 23017 --- Head Flying Hours | ||
+ | 0x03 0x018 4 54 --- Head Load Events | ||
+ | 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors | ||
+ | 0x03 0x028 4 53 --- Read Recovery Attempts | ||
+ | 0x03 0x030 4 11 --- Number of Mechanical Start Failures | ||
+ | 0x04 ===== = = === == General Errors Statistics (rev 1) == | ||
+ | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | ||
+ | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | ||
+ | 0x05 ===== = = === == Temperature Statistics (rev 1) == | ||
+ | 0x05 0x008 1 37 --- Current Temperature | ||
+ | 0x05 0x010 1 36 N-- Average Short Term Temperature | ||
+ | 0x05 0x018 1 34 N-- Average Long Term Temperature | ||
+ | 0x05 0x020 1 41 --- Highest Temperature | ||
+ | 0x05 0x028 1 17 --- Lowest Temperature | ||
+ | 0x05 0x030 1 38 N-- Highest Average Short Term Temperature | ||
+ | 0x05 0x038 1 24 N-- Lowest Average Short Term Temperature | ||
+ | 0x05 0x040 1 37 N-- Highest Average Long Term Temperature | ||
+ | 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature | ||
+ | 0x05 0x050 4 0 --- Time in Over-Temperature | ||
+ | 0x05 0x058 1 60 --- Specified Maximum Operating Temperature | ||
+ | 0x05 0x060 4 0 --- Time in Under-Temperature | ||
+ | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature | ||
+ | 0x06 ===== = = === == Transport Statistics (rev 1) == | ||
+ | 0x06 0x008 4 10048 --- Number of Hardware Resets | ||
+ | 0x06 0x010 4 229 --- Number of ASR Events | ||
+ | 0x06 0x018 4 0 --- Number of Interface CRC Errors | ||
+ | |||_ C monitored condition met | ||
+ | ||__ D supports DSN | ||
+ | |___ N normalized value | ||
+ | |||
+ | SATA Phy Event Counters (GP Log 0x11) | ||
+ | ID Size Value Description | ||
+ | 0x0001 2 0 Command failed due to ICRC error | ||
+ | 0x0002 2 0 R_ERR response for data FIS | ||
+ | 0x0003 2 0 R_ERR response for device-to-host data FIS | ||
+ | 0x0004 2 0 R_ERR response for host-to-device data FIS | ||
+ | 0x0005 2 0 R_ERR response for non-data FIS | ||
+ | 0x0006 2 0 R_ERR response for device-to-host non-data FIS | ||
+ | 0x0007 2 0 R_ERR response for host-to-device non-data FIS | ||
+ | 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | ||
+ | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET | ||
+ | 0x000b 2 0 CRC errors within host-to-device FIS | ||
+ | 0x000d 2 0 Non-CRC errors within host-to-device FIS | ||
</pre> | </pre> | ||
Line 2,280: | Line 4,484: | ||
= Western Digital Drives = | = Western Digital Drives = | ||
+ | |||
+ | Note that the Red line of drives, which WD has advertised as being suitable for Raid/NAS, is now a bit of a minefield. Pre-2020 drives are probably okay for raid, but then WD introduced SMR to your basic Red drive! These are now seriously UNsuitable, but WD also introduced the Red Pro and the Red Plus, which they have confirmed are and will remain CMR for the forseeable future. They are still okay for raid. | ||
+ | |||
== Raid drives == | == Raid drives == | ||
Latest revision as of 13:11, 21 June 2021
This page is meant to contain smartctl information for assorted drives, so people can look and see whether ERC etc is supported. It's quite hard to find out information from marketing information.
Please create the section header for a drive as the model number, year of purchase in brackets if known, and capacity.
The data should be the output of "smartctl -x" - for non-raid drives you may need to do "smartctl -s on /dev/sdX" to get the output as cheaper drives forget settings between reboots.
Drives were classified as "raid" or "non-raid" depending on whether they support SCT/ERC. As of 2020 Western Digital has started using SMR technology in Red drives which, while it would be fine for drives in an array, makes it impossible to actually add the drives to the array. These drives should be classified as non-raid. They have introduced two new lines of drives, the Red Plus, and the Red Pro, which they have explicitly said will remain CMR. These are okay.
Contents
|
[edit] Hitachi Drives
[edit] Raid drives
[edit] HGST MegaScale 4000
[edit] HGST HMS5C4040ALE640 (4TB)
smartctl 6.4 2015-06-04 r4109 [i686-w64-mingw32-2012r2(64)] (sf-6.4-1) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST MegaScale 4000 Device Model: HGST HMS5C4040ALE640 Serial Number: PL1331LAG9DZ0I LU WWN Device Id: 5 000cca 22ec44805 Firmware Version: MPAOA3W0 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5700 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 23 20:15:43 2019 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (44213) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 737) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 133 133 054 - 104 3 Spin_Up_Time POS--- 122 122 024 - 567 (Average 572) 4 Start_Stop_Count -O--C- 100 100 000 - 25 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 113 113 020 - 42 9 Power_On_Hours -O--C- 099 099 000 - 13179 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 25 192 Power-Off_Retract_Count -O--CK 100 100 000 - 304 193 Load_Cycle_Count -O--C- 100 100 000 - 304 194 Temperature_Celsius -O---- 153 153 000 - 39 (Min/Max 17/42) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 13162 - # 2 Short offline Completed without error 00% 13090 - # 3 Short offline Completed without error 00% 12994 - # 4 Short offline Completed without error 00% 12922 - # 5 Short offline Completed without error 00% 12826 - # 6 Short offline Completed without error 00% 12754 - # 7 Short offline Completed without error 00% 12658 - # 8 Short offline Completed without error 00% 12586 - # 9 Short offline Completed without error 00% 12490 - #10 Short offline Completed without error 00% 12418 - #11 Short offline Completed without error 00% 12322 - #12 Short offline Completed without error 00% 12250 - #13 Short offline Completed without error 00% 12154 - #14 Short offline Completed without error 00% 12082 - #15 Short offline Completed without error 00% 11986 - #16 Short offline Completed without error 00% 11914 - #17 Short offline Completed without error 00% 11818 - #18 Short offline Completed without error 00% 11746 - #19 Short offline Completed without error 00% 11650 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 29/41 Celsius Lifetime Min/Max Temperature: 17/42 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (127) Index Estimated Time Temperature Celsius 127 2019-04-23 20:15 39 ******************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 25 --- Lifetime Power-On Resets 0x01 0x010 4 13179 --- Power-on Hours 0x01 0x018 6 8637111250 --- Logical Sectors Written 0x01 0x020 6 11774418 --- Number of Write Commands 0x01 0x028 6 16919571572 --- Logical Sectors Read 0x01 0x030 6 68467965 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 13177 --- Spindle Motor Power-on Hours 0x03 0x010 4 13177 --- Head Flying Hours 0x03 0x018 4 304 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 39 --- Current Temperature 0x05 0x010 1 37 N-- Average Short Term Temperature 0x05 0x018 1 36 N-- Average Long Term Temperature 0x05 0x020 1 42 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x030 1 40 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 39 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 328 --- Number of Hardware Resets 0x06 0x010 4 75 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS
[edit] HGST HMS5C4040BLE640 (4TB)
smartctl 6.4 2015-06-04 r4109 [i686-w64-mingw32-2012r2(64)] (sf-6.4-1) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST MegaScale 4000 Device Model: HGST HMS5C4040BLE640 Serial Number: PL1331LAHE5ABI LU WWN Device Id: 5 000cca 22ed4145a Firmware Version: MPAOA5D0 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5700 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 23 20:13:09 2019 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 28) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 743) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 135 135 054 - 96 3 Spin_Up_Time POS--- 124 124 024 - 560 (Average 567) 4 Start_Stop_Count -O--C- 100 100 000 - 41 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 113 113 020 - 42 9 Power_On_Hours -O--C- 098 098 000 - 19846 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 41 192 Power-Off_Retract_Count -O--CK 100 100 000 - 825 193 Load_Cycle_Count -O--C- 100 100 000 - 825 194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 16/42) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 19829 - # 2 Short offline Completed without error 00% 19757 - # 3 Short offline Completed without error 00% 19661 - # 4 Short offline Completed without error 00% 19589 - # 5 Short offline Completed without error 00% 19493 - # 6 Short offline Completed without error 00% 19422 - # 7 Short offline Completed without error 00% 19325 - # 8 Short offline Completed without error 00% 19253 - # 9 Short offline Completed without error 00% 19157 - #10 Short offline Completed without error 00% 19085 - #11 Short offline Completed without error 00% 18989 - #12 Short offline Completed without error 00% 18917 - #13 Short offline Completed without error 00% 18821 - #14 Short offline Completed without error 00% 18749 - #15 Short offline Completed without error 00% 18653 - #16 Short offline Completed without error 00% 18581 - #17 Short offline Completed without error 00% 18485 - #18 Short offline Completed without error 00% 18413 - #19 Short offline Completed without error 00% 18317 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 28/39 Celsius Lifetime Min/Max Temperature: 16/42 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (75) Index Estimated Time Temperature Celsius 76 2019-04-23 18:06 38 ******************* ... ..(126 skipped). .. ******************* 75 2019-04-23 20:13 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 41 --- Lifetime Power-On Resets 0x01 0x018 6 7663959194 --- Logical Sectors Written 0x01 0x020 6 5705503 --- Number of Write Commands 0x01 0x028 6 58119952858 --- Logical Sectors Read 0x01 0x030 6 76400492 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 19842 --- Spindle Motor Power-on Hours 0x03 0x010 4 19842 --- Head Flying Hours 0x03 0x018 4 825 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 38 --- Current Temperature 0x05 0x010 1 37 N-- Average Short Term Temperature 0x05 0x018 1 35 N-- Average Long Term Temperature 0x05 0x020 1 42 --- Highest Temperature 0x05 0x028 1 16 --- Lowest Temperature 0x05 0x030 1 41 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 38 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 6322 --- Number of Hardware Resets 0x06 0x010 4 211 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS
[edit] HGST Ultrastar He8
[edit] HGST HUH728080ALE600 (8TB)
smartctl 6.2 2017-02-27 r4394 [x86_64-linux-3.10.0-693.5.2.el7.x86_64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Ultrastar He8 Device Model: HGST HUH728080ALE600 Serial Number: <edited out> LU WWN Device Id: 5 000cca 23bd5c0d5 Firmware Version: A4GNT7J0 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 10 10:10:22 2018 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 101) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: (1108) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 132 132 054 - 112 3 Spin_Up_Time POS--- 141 141 024 - 467 (Average 467) 4 Start_Stop_Count -O--C- 100 100 000 - 23 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 128 128 020 - 18 9 Power_On_Hours -O--C- 098 098 000 - 20591 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 23 22 Helium_Level PO---K 100 100 025 - 100 192 Power-Off_Retract_Count -O--CK 100 100 000 - 855 193 Load_Cycle_Count -O--C- 100 100 000 - 855 194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 20/45) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x12 GPL R/O 1 SATA NCQ Queue Management log 0x15 GPL,SL - 1 Reserved for Serial ATA 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 256 Current Device Internal Status Data log 0x25 GPL R/O 256 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 18205 - # 2 Extended offline Completed without error 00% 12267 - # 3 Extended offline Completed without error 00% 162 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 24/36 Celsius Lifetime Min/Max Temperature: 20/45 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (59) Index Estimated Time Temperature Celsius 60 2018-04-10 08:03 31 ************ ... ..(126 skipped). .. ************ 59 2018-04-10 10:10 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Description 1 ===== = = == General Statistics (rev 2) == 1 0x008 4 23 Lifetime Power-On Resets 1 0x018 6 102152062258 Logical Sectors Written 1 0x020 6 151308373 Number of Write Commands 1 0x028 6 1847803381217 Logical Sectors Read 1 0x030 6 12867845032 Number of Read Commands 1 0x038 6 74130934750 Date and Time TimeStamp 3 ===== = = == Rotating Media Statistics (rev 1) == 3 0x008 4 19590 Spindle Motor Power-on Hours 3 0x010 4 19590 Head Flying Hours 3 0x018 4 855 Head Load Events 3 0x020 4 0 Number of Reallocated Logical Sectors 3 0x028 4 2025815 Read Recovery Attempts 3 0x030 4 0 Number of Mechanical Start Failures 4 ===== = = == General Errors Statistics (rev 1) == 4 0x008 4 0 Number of Reported Uncorrectable Errors 4 0x010 4 0 Resets Between Cmd Acceptance and Completion 5 ===== = = == Temperature Statistics (rev 1) == 5 0x008 1 31 Current Temperature 5 0x010 1 30~ Average Short Term Temperature 5 0x018 1 30~ Average Long Term Temperature 5 0x020 1 45 Highest Temperature 5 0x028 1 20 Lowest Temperature 5 0x030 1 42~ Highest Average Short Term Temperature 5 0x038 1 25~ Lowest Average Short Term Temperature 5 0x040 1 41~ Highest Average Long Term Temperature 5 0x048 1 25~ Lowest Average Long Term Temperature 5 0x050 4 0 Time in Over-Temperature 5 0x058 1 60 Specified Maximum Operating Temperature 5 0x060 4 0 Time in Under-Temperature 5 0x068 1 0 Specified Minimum Operating Temperature 6 ===== = = == Transport Statistics (rev 1) == 6 0x008 4 3 Number of Hardware Resets 6 0x010 4 839 Number of ASR Events 6 0x018 4 0 Number of Interface CRC Errors |_ ~ normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS
[edit] Hitachi/HGST Ultrastar 7K4000
[edit] HGST HUS724020ALA640 (2TB)
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-4-amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Ultrastar 7K4000 Device Model: HGST HUS724020ALA640 Serial Number: PN1138P2GJ8MYH LU WWN Device Id: 5 000cca 24bc76662 Firmware Version: MF6OAA70 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 10 10:31:21 2017 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 28) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 328) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 137 137 054 - 78 3 Spin_Up_Time POS--- 149 149 024 - 434 (Average 402) 4 Start_Stop_Count -O--C- 100 100 000 - 18 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 142 142 020 - 25 9 Power_On_Hours -O--C- 098 098 000 - 15240 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 18 192 Power-Off_Retract_Count -O--CK 100 100 000 - 403 193 Load_Cycle_Count -O--C- 100 100 000 - 403 194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 23/49) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 90% 14493 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 35/40 Celsius Lifetime Min/Max Temperature: 23/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (96) Index Estimated Time Temperature Celsius 97 2017-10-10 08:24 36 ***************** ... ..(126 skipped). .. ***************** 96 2017-10-10 10:31 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 18 --- Lifetime Power-On Resets 0x01 0x018 6 353645484537 --- Logical Sectors Written 0x01 0x020 6 13505157115 --- Number of Write Commands 0x01 0x028 6 319592434652 --- Logical Sectors Read 0x01 0x030 6 2292219761 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 15238 --- Spindle Motor Power-on Hours 0x03 0x010 4 15238 --- Head Flying Hours 0x03 0x018 4 403 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 2 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 36 --- Current Temperature 0x05 0x010 1 36 N-- Average Short Term Temperature 0x05 0x018 1 37 N-- Average Long Term Temperature 0x05 0x020 1 49 --- Highest Temperature 0x05 0x028 1 23 --- Lowest Temperature 0x05 0x030 1 44 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 40 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 234 --- Number of Hardware Resets 0x06 0x010 4 209 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error
[edit] HGST HUS726060ALE610 (6TB)
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HUS726060ALE610 Serial Number: NAHSHAAX LU WWN Device Id: 5 000cca 242d8c599 Firmware Version: APGNT7J0 User Capacity: 6,001,175,126,016 bytes [6.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 10 12:14:03 2017 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 113) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 752) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 138 138 054 - 100 3 Spin_Up_Time POS--- 100 100 024 - 0 4 Start_Stop_Count -O--C- 100 100 000 - 6 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 136 136 020 - 16 9 Power_On_Hours -O--C- 098 098 000 - 16085 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 6 192 Power-Off_Retract_Count -O--CK 100 100 000 - 672 193 Load_Cycle_Count -O--C- 100 100 000 - 672 194 Temperature_Celsius -O---- 200 200 000 - 30 (Min/Max 19/36) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x12 GPL R/O 1 SATA NCQ NON-DATA log 0x15 GPL,SL R/W 1 SATA Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 256 Current Device Internal Status Data log 0x25 GPL R/O 256 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 15954 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 25/33 Celsius Lifetime Min/Max Temperature: 19/36 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (79) Index Estimated Time Temperature Celsius 80 2017-10-10 10:07 30 *********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Description 1 ===== = = == General Statistics (rev 2) == 1 0x008 4 6 Lifetime Power-On Resets 1 0x018 6 6837083432 Logical Sectors Written 1 0x020 6 18033121 Number of Write Commands 1 0x028 6 103037210207 Logical Sectors Read 1 0x030 6 84755469 Number of Read Commands 1 0x038 6 57908116650 Date and Time TimeStamp 3 ===== = = == Rotating Media Statistics (rev 1) == 3 0x008 4 16065 Spindle Motor Power-on Hours 3 0x010 4 16065 Head Flying Hours 3 0x018 4 672 Head Load Events 3 0x020 4 0 Number of Reallocated Logical Sectors 3 0x028 4 1904036 Read Recovery Attempts 3 0x030 4 0 Number of Mechanical Start Failures 4 ===== = = == General Errors Statistics (rev 1) == 4 0x008 4 0 Number of Reported Uncorrectable Errors 4 0x010 4 0 Resets Between Cmd Acceptance and Completion 5 ===== = = == Temperature Statistics (rev 1) == 5 0x008 1 30 Current Temperature 5 0x010 1 30~ Average Short Term Temperature 5 0x018 1 29~ Average Long Term Temperature 5 0x020 1 36 Highest Temperature 5 0x028 1 19 Lowest Temperature 5 0x030 1 34~ Highest Average Short Term Temperature 5 0x038 1 25~ Lowest Average Short Term Temperature 5 0x040 1 32~ Highest Average Long Term Temperature 5 0x048 1 25~ Lowest Average Long Term Temperature 5 0x050 4 0 Time in Over-Temperature 5 0x058 1 60 Specified Maximum Operating Temperature 5 0x060 4 0 Time in Under-Temperature 5 0x068 1 0 Specified Minimum Operating Temperature 6 ===== = = == Transport Statistics (rev 1) == 6 0x008 4 7 Number of Hardware Resets 6 0x010 4 0 Number of ASR Events 6 0x018 4 0 Number of Interface CRC Errors |_ ~ normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error
[edit] HUS726020ALA610 (2TB)
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HUS726020ALA610 Serial Number: K5GAEXJA LU WWN Device Id: 5 000cca 25ec4bff7 Firmware Version: T7R4 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 10 10:13:46 2017 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 113) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 288) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 134 134 054 - 116 3 Spin_Up_Time POS--- 134 134 024 - 222 (Average 222) 4 Start_Stop_Count -O--C- 100 100 000 - 22 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 128 128 020 - 18 9 Power_On_Hours -O--C- 100 100 000 - 6927 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 22 192 Power-Off_Retract_Count -O--CK 100 100 000 - 308 193 Load_Cycle_Count -O--C- 100 100 000 - 308 194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 14/42) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x12 GPL R/O 1 SATA NCQ NON-DATA log 0x15 GPL,SL R/W 1 SATA Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 256 Current Device Internal Status Data log 0x25 GPL R/O 256 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb2 GPL VS 688 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 6877 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 29/35 Celsius Lifetime Min/Max Temperature: 14/42 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (91) Index Estimated Time Temperature Celsius 92 2017-10-10 08:06 32 ************* ... ..(126 skipped). .. ************* 91 2017-10-10 10:13 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Description 1 ===== = = == General Statistics (rev 2) == 1 0x008 4 22 Lifetime Power-On Resets 1 0x018 6 30112514255 Logical Sectors Written 1 0x020 6 271980557 Number of Write Commands 1 0x028 6 979589491 Logical Sectors Read 1 0x030 6 6488861 Number of Read Commands 1 0x038 6 24938295750 Date and Time TimeStamp 3 ===== = = == Rotating Media Statistics (rev 1) == 3 0x008 4 6866 Spindle Motor Power-on Hours 3 0x010 4 6866 Head Flying Hours 3 0x018 4 308 Head Load Events 3 0x020 4 0 Number of Reallocated Logical Sectors 3 0x028 4 9482 Read Recovery Attempts 3 0x030 4 0 Number of Mechanical Start Failures 4 ===== = = == General Errors Statistics (rev 1) == 4 0x008 4 0 Number of Reported Uncorrectable Errors 4 0x010 4 0 Resets Between Cmd Acceptance and Completion 5 ===== = = == Temperature Statistics (rev 1) == 5 0x008 1 32 Current Temperature 5 0x010 1 32~ Average Short Term Temperature 5 0x018 1 31~ Average Long Term Temperature 5 0x020 1 42 Highest Temperature 5 0x028 1 14 Lowest Temperature 5 0x030 1 40~ Highest Average Short Term Temperature 5 0x038 1 25~ Lowest Average Short Term Temperature 5 0x040 1 37~ Highest Average Long Term Temperature 5 0x048 1 25~ Lowest Average Long Term Temperature 5 0x050 4 0 Time in Over-Temperature 5 0x058 1 60 Specified Maximum Operating Temperature 5 0x060 4 0 Time in Under-Temperature 5 0x068 1 0 Specified Minimum Operating Temperature 6 ===== = = == Transport Statistics (rev 1) == 6 0x008 4 14 Number of Hardware Resets 6 0x010 4 22 Number of ASR Events 6 0x018 4 0 Number of Interface CRC Errors |_ ~ normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error
[edit] Hitachi Ultrastar 7K3000
[edit] Hitachi HUA723030ALA640 3TB
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Ultrastar 7K3000 Device Model: Hitachi HUA723030ALA640 Serial Number: MK0331YHH2R1BA LU WWN Device Id: 5 000cca 225cf52ff Firmware Version: MKAOA800 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 10 11:12:40 2017 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (29746) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 496) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 135 135 054 - 85 3 Spin_Up_Time POS--- 100 100 024 - 506 4 Start_Stop_Count -O--C- 100 100 000 - 14 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 138 138 020 - 25 9 Power_On_Hours -O--C- 093 093 000 - 50018 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 14 192 Power-Off_Retract_Count -O--CK 099 099 000 - 1512 193 Load_Cycle_Count -O--C- 099 099 000 - 1512 194 Temperature_Celsius -O---- 222 222 000 - 27 (Min/Max 17/41) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 49968 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 24/39 Celsius Lifetime Min/Max Temperature: 17/41 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (69) Index Estimated Time Temperature Celsius 70 2017-10-10 09:05 27 ******** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Description 1 ===== = = == General Statistics (rev 1) == 1 0x008 4 14 Lifetime Power-On Resets 1 0x010 4 50018 Power-on Hours 1 0x018 6 17970047602 Logical Sectors Written 1 0x020 6 204753509 Number of Write Commands 1 0x028 6 420723716215 Logical Sectors Read 1 0x030 6 12875958968 Number of Read Commands 3 ===== = = == Rotating Media Statistics (rev 1) == 3 0x008 4 50010 Spindle Motor Power-on Hours 3 0x010 4 50010 Head Flying Hours 3 0x018 4 1512 Head Load Events 3 0x020 4 0 Number of Reallocated Logical Sectors 3 0x028 4 23 Read Recovery Attempts 3 0x030 4 0 Number of Mechanical Start Failures 4 ===== = = == General Errors Statistics (rev 1) == 4 0x008 4 0 Number of Reported Uncorrectable Errors 4 0x010 4 0 Resets Between Cmd Acceptance and Completion 5 ===== = = == Temperature Statistics (rev 1) == 5 0x008 1 27 Current Temperature 5 0x010 1 26~ Average Short Term Temperature 5 0x018 1 26~ Average Long Term Temperature 5 0x020 1 41 Highest Temperature 5 0x028 1 17 Lowest Temperature 5 0x030 1 33~ Highest Average Short Term Temperature 5 0x038 1 25~ Lowest Average Short Term Temperature 5 0x040 1 32~ Highest Average Long Term Temperature 5 0x048 1 25~ Lowest Average Long Term Temperature 5 0x050 4 0 Time in Over-Temperature 5 0x058 1 60 Specified Maximum Operating Temperature 5 0x060 4 0 Time in Under-Temperature 5 0x068 1 0 Specified Minimum Operating Temperature 6 ===== = = == Transport Statistics (rev 1) == 6 0x008 4 29 Number of Hardware Resets 6 0x010 4 21 Number of ASR Events 6 0x018 4 0 Number of Interface CRC Errors |_ ~ normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error
[edit] Non-Raid drives
[edit] Samsung drives
[edit] Raid drives
[edit] SAMSUNG MZ7KM480HAHP-00005
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SAMSUNG MZ7KM480HAHP-00005 Serial Number: S2HSNX0H801784 LU WWN Device Id: 5 002538 c403a4fbc Firmware Version: GXM1003Q User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 10 10:13:39 2017 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2100) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 35) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 6523 12 Power_Cycle_Count -O--CK 099 099 000 - 13 177 Wear_Leveling_Count PO--C- 099 099 005 - 7 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 3837 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 065 059 000 - 35 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 202 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 235 Unknown_Attribute -O--C- 099 099 000 - 8 241 Total_LBAs_Written -O--CK 099 099 000 - 744789435 242 Total_LBAs_Read -O--CK 099 099 000 - 141692277 243 Unknown_Attribute -O--CK 100 100 000 - 0 244 Unknown_Attribute -O--CK 100 100 000 - 0 245 Unknown_Attribute -O--CK 100 100 000 - 65535 246 Unknown_Attribute -O--CK 100 100 000 - 65535 247 Unknown_Attribute -O--CK 100 100 000 - 65535 251 Unknown_Attribute -O--CK 100 100 000 - 10942216040 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 6466 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was completed without error Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SCT command executing in background (5) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 32/38 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 4294967295/4294967295 SCT Temperature History Version: 3 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (88) Index Estimated Time Temperature Celsius 89 2017-10-09 13:00 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 19 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
[edit] SAMSUNG MZ7LN128HCHP-00000
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SAMSUNG MZ7LN128HCHP-00000 Serial Number: S1ZFNXAG652991 LU WWN Device Id: 5 002538 d40286c3d Firmware Version: EMT0100Q User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 10 12:14:03 2017 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 64) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 096 096 000 - 16093 12 Power_Cycle_Count -O--CK 099 099 000 - 7 170 Unknown_Attribute -O--CK 100 100 010 - 0 171 Unknown_Attribute -O--CK 100 100 010 - 0 172 Unknown_Attribute -O--CK 100 100 010 - 0 173 Unknown_Attribute PO--CK 097 097 005 - 52 174 Unknown_Attribute -O--CK 099 099 000 - 3 178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 325 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 194 Temperature_Celsius -O--CK 068 055 000 - 32 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 233 Media_Wearout_Indicator PO--C- 097 097 000 - 16341007 241 Total_LBAs_Written -O--CK 099 099 000 - 2219 242 Total_LBAs_Read -O--CK 099 099 000 - 5 249 Unknown_Attribute -O--CK 099 099 000 - 6688 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 15950 - Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SCT command executing in background (5) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 30/45 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 1048576/0 SCT Temperature History Version: 3 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (77) Index Estimated Time Temperature Celsius 77 2017-10-10 12:10 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 19 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
[edit] Non-Raid drives
[edit] Seagate drives
[edit] Raid drives
Seagate NAS
[edit] Seagate Ironwolf
[edit] ST3000VN007-XXXXXX (3TB)
3TB Iron Wolf smartctl: === START OF INFORMATION SECTION === Device Model: ST3000VN007-XXXXXX Serial Number: XXXXXX LU WWN Device Id: XXXXXX Firmware Version: SC60 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5900 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Apr 10 09:04:59 2018 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 107) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 389) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10
[edit] Seagate Enterprise Capacity
[edit] ST10000NM0016-1TT101 (10TB)
smartctl 6.2 2017-02-27 r4394 [x86_64-linux-3.10.0-693.5.2.el7.x86_64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Enterprise Capacity 3.5 HDD Device Model: ST10000NM0016-1TT101 Serial Number: <edited out> LU WWN Device Id: 5 000c50 0a32d97b5 Firmware Version: SND0 User Capacity: 10,000,831,348,736 bytes [10.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 (unknown minor revision code: 0x006d) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 10 10:09:57 2018 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 567) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 848) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 083 064 044 - 181534504 3 Spin_Up_Time PO---- 094 094 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 6 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 088 060 045 - 656392529 9 Power_On_Hours -O--CK 096 096 000 - 3553 (46 93 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 6 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 0 0 189 High_Fly_Writes -O-RCK 084 084 000 - 16 190 Airflow_Temperature_Cel -O---K 073 064 040 - 27 (Min/Max 22/36) 191 G-Sense_Error_Rate -O--CK 097 097 000 - 7465 192 Power-Off_Retract_Count -O--CK 100 100 000 - 8 193 Load_Cycle_Count -O--CK 087 087 000 - 26119 194 Temperature_Celsius -O---K 027 040 000 - 27 (0 20 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 033 003 000 - 181534504 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2 240 Head_Flying_Hours ------ 100 253 000 - 2435h+15m+52.041s 241 Total_LBAs_Written ------ 100 253 000 - 115878887963 242 Total_LBAs_Read ------ 100 253 000 - 459691652076 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL R/O 256 Device Statistics log 0x04 SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL - 2048 Reserved 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x15 GPL - 1 Reserved for Serial ATA 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 768 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 16320 Device vendor specific log 0xa6 GPL VS 192 Device vendor specific log 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xad GPL VS 16 Device vendor specific log 0xb0 GPL VS 17208 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc9 GPL,SL VS 8 Device vendor specific log 0xca GPL,SL VS 16 Device vendor specific log 0xd1 GPL VS 304 Device vendor specific log 0xd2 GPL VS 10000 Device vendor specific log 0xd4 GPL VS 2048 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 1161 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 22/36 Celsius Lifetime Min/Max Temperature: 20/52 Celsius Under/Over Temperature Limit Count: 0/2446 SCT Temperature History Version: 2 Temperature Sampling Period: 3 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (7) Index Estimated Time Temperature Celsius 0 2018-04-10 02:56 26 ******* 1 2018-04-10 03:55 25 ****** 2 2018-04-10 04:54 25 ****** 3 2018-04-10 05:53 25 ****** 4 2018-04-10 06:52 26 ******* 5 2018-04-10 07:51 27 ******** 6 2018-04-10 08:50 27 ******** 7 2018-04-10 09:49 27 ******** SCT Error Recovery Control: Read: 100 (10.0 seconds) Write: 100 (10.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Description 1 ===== = = == General Statistics (rev 1) == 1 0x008 4 6 Lifetime Power-On Resets 1 0x010 4 3553 Power-on Hours 1 0x018 6 115878885011 Logical Sectors Written 1 0x020 6 268245477 Number of Write Commands 1 0x028 6 459691651524 Logical Sectors Read 1 0x030 6 1601551638 Number of Read Commands 1 0x038 6 - Date and Time TimeStamp 3 ===== = = == Rotating Media Statistics (rev 1) == 3 0x008 4 1594330626~ Spindle Motor Power-on Hours 3 0x010 4 1594327100~ Head Flying Hours 3 0x018 4 26119 Head Load Events 3 0x020 4 0 Number of Reallocated Logical Sectors 3 0x028 4 0 Read Recovery Attempts 3 0x030 4 0 Number of Mechanical Start Failures 3 0x038 4 0 Number of Realloc. Candidate Logical Sectors 3 0x040 7 8 Unknown 4 ===== = = == General Errors Statistics (rev 1) == 4 0x008 4 0 Number of Reported Uncorrectable Errors 4 0x010 4 0 Resets Between Cmd Acceptance and Completion 5 ===== = = == Temperature Statistics (rev 1) == 5 0x008 1 27 Current Temperature 5 0x010 1 27 Average Short Term Temperature 5 0x018 1 26 Average Long Term Temperature 5 0x020 1 36 Highest Temperature 5 0x028 1 0 Lowest Temperature 5 0x030 1 34 Highest Average Short Term Temperature 5 0x038 1 25 Lowest Average Short Term Temperature 5 0x040 1 29 Highest Average Long Term Temperature 5 0x048 1 26 Lowest Average Long Term Temperature 5 0x050 4 0 Time in Over-Temperature 5 0x058 1 60 Specified Maximum Operating Temperature 5 0x060 4 20 Time in Under-Temperature 5 0x068 1 5 Specified Minimum Operating Temperature 6 ===== = = == Transport Statistics (rev 1) == 6 0x008 4 11 Number of Hardware Resets 6 0x010 4 1 Number of ASR Events 6 0x018 4 2 Number of Interface CRC Errors 255 ===== = = == Unknown Statistics (rev 1) == 255 0x008 7 0 Unknown |_ ~ normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS
[edit] Seagate Constellation
[edit] ST2000NM0033-9ZM175 (2TB)
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.32-openvz-042stab123.8-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: ST2000NM0033-9ZM175 Serial Number: Z1Y0MAX4 LU WWN Device Id: 5 000c50 064b09f28 Firmware Version: SN03 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 9 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Oct 10 10:29:06 2017 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 592) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 246) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 084 063 044 - 2318897 3 Spin_Up_Time PO---- 094 094 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 9 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 095 060 030 - 3348031798 9 Power_On_Hours -O--CK 061 061 000 - 34301 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 9 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 068 061 045 - 32 (Min/Max 23/39) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 6 193 Load_Cycle_Count -O--CK 100 100 000 - 1458 194 Temperature_Celsius -O---K 032 040 000 - 32 (0 22 0 0) 195 Hardware_ECC_Recovered -O-RC- 043 009 000 - 2318897 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 5 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] GP/S Log at address 0x08 has 2 sectors [Power Conditions] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP Log at address 0x21 has 1 sectors [Write stream error log] GP Log at address 0x22 has 1 sectors [Read stream error log] GP/S Log at address 0x30 has 9 sectors [Reserved] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 25207 - # 2 Extended offline Completed without error 00% 12345 - # 3 Extended offline Completed without error 00% 879 - # 4 Extended offline Completed without error 00% 3 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 23/39 Celsius Lifetime Min/Max Temperature: 22/39 Celsius Under/Over Temperature Limit Count: 0/205519 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (18) Index Estimated Time Temperature Celsius 19 2017-10-09 13:10 32 ************* ... ..(126 skipped). .. ************* 18 2017-10-10 10:20 32 ************* SCT Error Recovery Control: Read: 100 (10.0 seconds) Write: 100 (10.0 seconds) SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 115 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS
[edit] ST91000640NS (1TB)
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.16.0-0.bpo.4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: ST91000640NS Serial Number: 9XG4ZBZJ LU WWN Device Id: 5 000c50 064438461 Firmware Version: SN03 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Tue Oct 10 12:16:17 2017 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 642) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 203) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 079 064 044 - 91112581 3 Spin_Up_Time PO---- 094 094 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 11 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 078 060 030 - 67076501 9 Power_On_Hours -O--CK 074 074 000 - 23393 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 11 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 063 053 045 - 37 (Min/Max 29/47) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 7 193 Load_Cycle_Count -O--CK 100 100 000 - 13 194 Temperature_Celsius -O---K 037 047 000 - 37 (0 19 0 0) 195 Hardware_ECC_Recovered -O-RC- 115 100 000 - 91112581 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 5 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x12 has 1 sectors [Reserved for Serial ATA] GP Log at address 0x21 has 1 sectors [Write stream error log] GP Log at address 0x22 has 1 sectors [Read stream error log] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP Log at address 0xbf has 65535 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 29/47 Celsius Lifetime Min/Max Temperature: 19/54 Celsius Under/Over Temperature Limit Count: 0/138619 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (106) Index Estimated Time Temperature Celsius 106 2017-10-10 12:10 37 ****************** SCT Error Recovery Control: Read: 100 (10.0 seconds) Write: 100 (10.0 seconds) SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 103 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS
[edit] ST4000NM0033-9ZM170 (4TB)
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.18-9-pve] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Constellation ES.3 Device Model: ST4000NM0033-9ZM170 Serial Number: S1Z10PDB LU WWN Device Id: 5 000c50 08081bbf7 Firmware Version: SN04 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 23 19:57:29 2019 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 498) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 070 063 044 - 11041842 3 Spin_Up_Time PO---- 093 092 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 80 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 090 060 030 - 1009049582 9 Power_On_Hours -O--CK 069 069 000 - 27508 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 81 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 069 046 045 - 31 (Min/Max 23/33) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 80 193 Load_Cycle_Count -O--CK 100 100 000 - 1206 194 Temperature_Celsius -O---K 031 054 000 - 31 (0 12 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 059 010 000 - 11041842 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL,SL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbd GPL VS 512 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc2 GPL,SL VS 50 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 5 Device vendor specific log 0xd1 GPL,SL VS 8 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 23/33 Celsius Lifetime Min/Max Temperature: 12/54 Celsius Under/Over Temperature Limit Count: 0/4597 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (77) Index Estimated Time Temperature Celsius 78 2019-04-22 22:40 31 ************ SCT Error Recovery Control: Read: 100 (10.0 seconds) Write: 100 (10.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS
[edit] ST4000NM0035-1V4107 (4TB)
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.18-9-pve] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST4000NM0035-1V4107 Serial Number: ZC19CLL4 LU WWN Device Id: 5 000c50 0b3c35b95 Firmware Version: TN04 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 23 20:02:28 2019 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 402) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 076 064 044 - 40058651 3 Spin_Up_Time PO---- 100 100 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 1 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 083 060 045 - 197161731 9 Power_On_Hours -O--CK 100 100 000 - 767 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 1 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 073 071 040 - 27 (Min/Max 22/29) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 432 192 Power-Off_Retract_Count -O--CK 100 100 000 - 25 193 Load_Cycle_Count -O--CK 100 100 000 - 36 194 Temperature_Celsius -O---K 027 040 000 - 27 (0 22 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 001 001 000 - 40058651 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 764 (144 24 0) 241 Total_LBAs_Written ------ 100 253 000 - 927745061 242 Total_LBAs_Read ------ 100 253 000 - 1309602584 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x15 GPL R/W 1 SATA Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 8160 Device vendor specific log 0xa6 GPL VS 192 Device vendor specific log 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log 0xad GPL VS 16 Device vendor specific log 0xb0 GPL VS 9048 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xd1 GPL VS 264 Device vendor specific log 0xd2 GPL VS 10000 Device vendor specific log 0xd4 GPL VS 2048 Device vendor specific log 0xda GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 22/29 Celsius Lifetime Min/Max Temperature: 22/29 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 3 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 10/40 Celsius Min/Max Temperature Limit: 5/60 Celsius Temperature History Size (Index): 128 (12) Index Estimated Time Temperature Celsius 13 2019-04-18 14:14 27 ******** SCT Error Recovery Control: Read: 100 (10.0 seconds) Write: 100 (10.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1 --- Lifetime Power-On Resets 0x01 0x010 4 767 --- Power-on Hours 0x01 0x018 6 927745061 --- Logical Sectors Written 0x01 0x020 6 25181361 --- Number of Write Commands 0x01 0x028 6 1309602584 --- Logical Sectors Read 0x01 0x030 6 66616129 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 2337644972 N-- Spindle Motor Power-on Hours 0x03 0x010 4 2337644969 N-- Head Flying Hours 0x03 0x018 4 36 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 25 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 27 --- Current Temperature 0x05 0x010 1 27 --- Average Short Term Temperature 0x05 0x018 1 - --- Average Long Term Temperature 0x05 0x020 1 29 --- Highest Temperature 0x05 0x028 1 0 --- Lowest Temperature 0x05 0x030 1 27 --- Highest Average Short Term Temperature 0x05 0x038 1 24 --- Lowest Average Short Term Temperature 0x05 0x040 1 - --- Highest Average Long Term Temperature 0x05 0x048 1 - --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 10 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 2 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS
[edit] Seagate Samsung Spinpoint
[edit] ST2000LM003 (2016) 2 TB
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.4.79-19-default] (SUSE RPM) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M9T Device Model: ST2000LM003 HN-M201RAD Serial Number: S321J9DG805231 LU WWN Device Id: 5 0004cf 2106b38eb Firmware Version: 2BC10001 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Sep 4 19:57:01 2017 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 40) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (22740) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 379) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 092 092 025 - 2555 4 Start_Stop_Count -O--CK 100 100 000 - 763 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 1169 10 Spin_Retry_Count -O--CK 252 252 051 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 794 191 G-Sense_Error_Rate -O---K 100 100 000 - 13 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 051 000 - 31 (Min/Max 13/49) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 11 223 Load_Retry_Count -O--CK 100 100 000 - 11 225 Load_Cycle_Count -O--CK 090 090 000 - 107949 241 Total_LBAs_Written -O--CK 097 094 000 - 4579156 242 Total_LBAs_Read -O--CK 095 094 000 - 7188547 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 80% 1169 - # 2 Extended offline Interrupted (host reset) 90% 1065 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Interrupted [80% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 22/31 Celsius Lifetime Min/Max Temperature: 13/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (114) Index Estimated Time Temperature Celsius 46 2017-09-04 14:15 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS
[edit] Seagate Surveillance SV7
[edit] ST3000VX006-1HH166 (3TB)
smartctl 6.4 2015-06-04 r4109 [i686-w64-mingw32-2012r2(64)] (sf-6.4-1) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST3000VX006-1HH166 Serial Number: W6A15S9Y LU WWN Device Id: 5 000c50 0903c3e93 Firmware Version: CV12 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5900 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 23 20:21:02 2019 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 97) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 374) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10b9) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 120 099 006 - 235015752 3 Spin_Up_Time PO---- 093 093 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 93 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 071 060 030 - 12748038 9 Power_On_Hours -O--CK 074 074 000 - 23463 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 89 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 058 058 000 - 42 190 Airflow_Temperature_Cel -O---K 065 056 045 - 35 (Min/Max 24/36) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 50 193 Load_Cycle_Count -O--CK 100 100 000 - 150 194 Temperature_Celsius -O---K 035 044 000 - 35 (0 14 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL,SL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 5 Device vendor specific log 0xd1 GPL,SL VS 8 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 23446 - # 2 Short offline Completed without error 00% 23374 - # 3 Short offline Completed without error 00% 23278 - # 4 Short offline Completed without error 00% 23206 - # 5 Short offline Completed without error 00% 23110 - # 6 Short offline Completed without error 00% 23038 - # 7 Short offline Completed without error 00% 22942 - # 8 Short offline Completed without error 00% 22870 - # 9 Short offline Completed without error 00% 22774 - #10 Short offline Completed without error 00% 22702 - #11 Short offline Completed without error 00% 22606 - #12 Short offline Completed without error 00% 22534 - #13 Short offline Completed without error 00% 22438 - #14 Short offline Completed without error 00% 22366 - #15 Short offline Completed without error 00% 22270 - #16 Short offline Completed without error 00% 22198 - #17 Short offline Completed without error 00% 22102 - #18 Short offline Completed without error 00% 22030 - #19 Short offline Completed without error 00% 21934 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 24/36 Celsius Lifetime Min/Max Temperature: 14/44 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 94 minutes Min/Max recommended Temperature: 1/61 Celsius Min/Max Temperature Limit: 2/60 Celsius Temperature History Size (Index): 128 (53) Index Estimated Time Temperature Celsius 53 2019-04-23 19:40 35 **************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS
[edit] Non-Raid drives
[edit] Seagate Barracuda
[edit] ST3000DM001 (2014) 3 TB
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.4.6-gentoo] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST3000DM001-1CH166 Serial Number: W1F50K0F LU WWN Device Id: 5 000c50 0737a98a4 Firmware Version: CC27 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Sep 4 16:22:19 2017 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 592) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 328) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 115 099 006 - 97112728 3 Spin_Up_Time PO---- 094 094 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 260 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 076 060 030 - 42637297 9 Power_On_Hours -O--CK 085 085 000 - 13787 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 099 020 - 1425 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 0 2 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 055 049 045 - 45 (Min/Max 28/45) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 28 193 Load_Cycle_Count -O--CK 098 098 000 - 5774 194 Temperature_Celsius -O---K 045 051 000 - 45 (0 14 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 14253h+26m+59.844s 241 Total_LBAs_Written ------ 100 253 000 - 91787618842 242 Total_LBAs_Read ------ 100 253 000 - 3706183336 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc4 GPL,SL VS 5 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 45 Celsius Power Cycle Min/Max Temperature: 20/45 Celsius Lifetime Min/Max Temperature: 13/51 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS
[edit] Toshiba Drives
[edit] Raid drives
[edit] Toshiba P300 3TB
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.0-81-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA HDWD130 Serial Number: 9616Y5XAS LU WWN Device Id: 5 000039 fe6c327ce Firmware Version: MX6OACF0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Oct 10 10:51:24 2017 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (22365) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 373) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 139 139 054 - 71 3 Spin_Up_Time POS--- 140 140 024 - 391 (Average 430) 4 Start_Stop_Count -O--C- 100 100 000 - 27 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 124 124 020 - 33 9 Power_On_Hours -O--C- 100 100 000 - 6514 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 27 192 Power-Off_Retract_Count -O--CK 100 100 000 - 85 193 Load_Cycle_Count -O--C- 100 100 000 - 85 194 Temperature_Celsius -O---- 125 125 000 - 48 (Min/Max 14/63) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 6428 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 48 Celsius Power Cycle Min/Max Temperature: 34/57 Celsius Lifetime Min/Max Temperature: 14/63 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (38) Index Estimated Time Temperature Celsius 39 2017-10-10 08:44 48 ***************************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Description 1 ===== = = == General Statistics (rev 1) == 1 0x008 4 27 Lifetime Power-On Resets 1 0x010 4 6514 Power-on Hours 1 0x018 6 32561052159 Logical Sectors Written 1 0x020 6 126298297 Number of Write Commands 1 0x028 6 86911776569 Logical Sectors Read 1 0x030 6 114762752 Number of Read Commands 3 ===== = = == Rotating Media Statistics (rev 1) == 3 0x008 4 6513 Spindle Motor Power-on Hours 3 0x010 4 6513 Head Flying Hours 3 0x018 4 85 Head Load Events 3 0x020 4 0 Number of Reallocated Logical Sectors 3 0x028 4 0 Read Recovery Attempts 3 0x030 4 11 Number of Mechanical Start Failures 4 ===== = = == General Errors Statistics (rev 1) == 4 0x008 4 0 Number of Reported Uncorrectable Errors 4 0x010 4 22 Resets Between Cmd Acceptance and Completion 5 ===== = = == Temperature Statistics (rev 1) == 5 0x008 1 48 Current Temperature SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error
[edit] Toshiba DT01ACA200 2TB
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.13-2-pve] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA200 Serial Number: 25G9S09AT LU WWN Device Id: 5 000039 ffaeeb43a Firmware Version: MX4OABB0 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Apr 23 19:39:35 2019 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (14822) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 247) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 139 139 054 - 71 3 Spin_Up_Time POS--- 126 126 024 - 303 (Average 300) 4 Start_Stop_Count -O--C- 100 100 000 - 60 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 124 124 020 - 33 9 Power_On_Hours -O--C- 096 096 000 - 31428 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 60 192 Power-Off_Retract_Count -O--CK 100 100 000 - 256 193 Load_Cycle_Count -O--C- 100 100 000 - 256 194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 20/41) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short captive Interrupted (host reset) 90% 31067 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 22/33 Celsius Lifetime Min/Max Temperature: 20/41 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (18) Index Estimated Time Temperature Celsius 19 2019-04-23 17:32 30 *********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 60 --- Lifetime Power-On Resets 0x01 0x010 4 31428 --- Power-on Hours 0x01 0x018 6 41557643295 --- Logical Sectors Written 0x01 0x020 6 213298856 --- Number of Write Commands 0x01 0x028 6 176899145906 --- Logical Sectors Read 0x01 0x030 6 957418350 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 31424 --- Spindle Motor Power-on Hours 0x03 0x010 4 31424 --- Head Flying Hours 0x03 0x018 4 256 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 6 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 31 --- Current Temperature 0x05 0x010 1 30 N-- Average Short Term Temperature 0x05 0x018 1 29 N-- Average Long Term Temperature 0x05 0x020 1 41 --- Highest Temperature 0x05 0x028 1 20 --- Lowest Temperature 0x05 0x030 1 36 N-- Highest Average Short Term Temperature 0x05 0x038 1 24 N-- Lowest Average Short Term Temperature 0x05 0x040 1 32 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 780 --- Number of Hardware Resets 0x06 0x010 4 134 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS
[edit] Toshiba MD04ABA400V 4TB
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.0-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA MD04ABA400V Serial Number: 47K4KF71FMYC LU WWN Device Id: 5 000039 7bb881feb Firmware Version: FP1T User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Apr 23 19:44:38 2019 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 535) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 5175 4 Start_Stop_Count -O--CK 100 100 000 - 59 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 062 062 000 - 15487 10 Spin_Retry_Count PO--CK 101 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 59 191 G-Sense_Error_Rate -O--CK 100 100 000 - 19 192 Power-Off_Retract_Count -O--CK 100 100 000 - 47 193 Load_Cycle_Count -O--CK 100 100 000 - 60 194 Temperature_Celsius -O---K 100 100 000 - 25 (Min/Max 9/37) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 220 Disk_Shift -O---- 100 100 000 - 0 222 Loaded_Hours -O--CK 062 062 000 - 15459 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 718 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 12288 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa7 GPL VS 8 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 12/33 Celsius Lifetime Min/Max Temperature: 9/37 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/55 Celsius Min/Max Temperature Limit: 5/55 Celsius Temperature History Size (Index): 478 (202) Index Estimated Time Temperature Celsius 203 2019-04-23 11:47 32 ************* Unexpected SCT status 0x0000 (action_code=2, function_code=1) SCT (Get) Error Recovery Control command failed Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 59 --- Lifetime Power-On Resets 0x01 0x010 4 15487 --- Power-on Hours 0x01 0x018 6 39771618341 --- Logical Sectors Written 0x01 0x020 6 443045202 --- Number of Write Commands 0x01 0x028 6 57633638178 --- Logical Sectors Read 0x01 0x030 6 549986646 --- Number of Read Commands 0x02 ===== = = === == Free-Fall Statistics (rev 1) == 0x02 0x010 4 19 --- Overlimit Shock Events 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 15486 --- Spindle Motor Power-on Hours 0x03 0x010 4 15459 --- Head Flying Hours 0x03 0x018 4 60 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 1 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 25 --- Current Temperature 0x05 0x010 1 31 N-- Average Short Term Temperature 0x05 0x018 1 27 N-- Average Long Term Temperature 0x05 0x020 1 37 --- Highest Temperature 0x05 0x028 1 9 --- Lowest Temperature 0x05 0x030 1 34 N-- Highest Average Short Term Temperature 0x05 0x038 1 14 N-- Lowest Average Short Term Temperature 0x05 0x040 1 31 N-- Highest Average Long Term Temperature 0x05 0x048 1 20 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 6585 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 1 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 1 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 130 Device-to-host register FISes sent due to a COMRESET 0x000b 4 1 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
[edit] Toshiba MG05ACA800E 8TB
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA MG05ACA800E Serial Number: Y7SBK2JWF56F LU WWN Device Id: 5 000039 82bc026a4 Firmware Version: GX4K User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 23 19:47:57 2019 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Disabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 778) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 15812 4 Start_Stop_Count -O--CK 100 100 000 - 11 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 075 075 000 - 10282 10 Spin_Retry_Count PO--CK 100 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 9 193 Load_Cycle_Count -O--CK 100 100 000 - 18 194 Temperature_Celsius -O---K 100 100 000 - 33 (Min/Max 15/47) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 220 Disk_Shift -O---- 100 100 000 - 0 222 Loaded_Hours -O--CK 075 075 000 - 10281 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 651 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 2 Device Statistics Notification 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 16384 Current Device Internal Status Data log 0x25 GPL R/O 16384 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa7 GPL VS 8 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 10193 - # 2 Short offline Completed without error 00% 9953 - # 3 Short offline Completed without error 00% 9689 - # 4 Short offline Completed without error 00% 9449 - # 5 Short offline Completed without error 00% 9209 - # 6 Short offline Completed without error 00% 8777 - # 7 Short offline Completed without error 00% 8537 - # 8 Short offline Completed without error 00% 8273 - # 9 Short offline Completed without error 00% 8033 - #10 Short offline Completed without error 00% 7793 - #11 Short offline Completed without error 00% 7529 - #12 Short offline Completed without error 00% 7289 - #13 Short offline Completed without error 00% 7049 - #14 Short offline Completed without error 00% 6809 - #15 Short offline Completed without error 00% 6570 - #16 Short offline Completed without error 00% 6330 - #17 Short offline Completed without error 00% 6066 - #18 Short offline Completed without error 00% 5826 - #19 Short offline Completed without error 00% 5586 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 27/36 Celsius Lifetime Min/Max Temperature: 15/47 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/55 Celsius Min/Max Temperature Limit: 5/55 Celsius Temperature History Size (Index): 478 (418) Index Estimated Time Temperature Celsius 419 2019-04-23 11:50 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 11 --- Lifetime Power-On Resets 0x01 0x010 4 10282 --- Power-on Hours 0x01 0x018 6 14436451156 --- Logical Sectors Written 0x01 0x020 6 142223482 --- Number of Write Commands 0x01 0x028 6 103102206648 --- Logical Sectors Read 0x01 0x030 6 1087302114 --- Number of Read Commands 0x01 0x038 6 37015210380 --- Date and Time TimeStamp 0x02 ===== = = === == Free-Fall Statistics (rev 1) == 0x02 0x010 4 0 --- Overlimit Shock Events 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 10281 --- Spindle Motor Power-on Hours 0x03 0x010 4 10281 --- Head Flying Hours 0x03 0x018 4 18 --- Head Load Events 0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors 0x03 0x028 4 2 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 9 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x010 1 33 N-- Average Short Term Temperature 0x05 0x018 1 31 N-- Average Long Term Temperature 0x05 0x020 1 47 --- Highest Temperature 0x05 0x028 1 15 --- Lowest Temperature 0x05 0x030 1 41 N-- Highest Average Short Term Temperature 0x05 0x038 1 27 N-- Lowest Average Short Term Temperature 0x05 0x040 1 38 N-- Highest Average Long Term Temperature 0x05 0x048 1 29 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 394 --- Number of Hardware Resets 0x06 0x010 4 27 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) supported [please try: '-l defects'] SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
[edit] Toshiba DT01ABA300V 3TB
smartctl 6.4 2015-06-04 r4109 [i686-w64-mingw32-2012r2(64)] (sf-6.4-1) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA DT01ABA300V Serial Number: 36UZZG5GT LU WWN Device Id: 5 000039 fe3ce1577 Firmware Version: MZ6OABB0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5940 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 23 20:21:07 2019 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (26282) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 438) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 100 100 054 - 0 3 Spin_Up_Time POS--- 133 133 024 - 411 (Average 410) 4 Start_Stop_Count -O--C- 100 100 000 - 54 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 020 - 0 9 Power_On_Hours -O--C- 097 097 000 - 23021 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 54 192 Power-Off_Retract_Count -O--CK 100 100 000 - 54 193 Load_Cycle_Count -O--C- 100 100 000 - 54 194 Temperature_Celsius -O---- 162 162 000 - 37 (Min/Max 17/41) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 23004 - # 2 Short offline Completed without error 00% 22932 - # 3 Short offline Completed without error 00% 22836 - # 4 Short offline Completed without error 00% 22764 - # 5 Short offline Completed without error 00% 22668 - # 6 Short offline Completed without error 00% 22596 - # 7 Short offline Completed without error 00% 22500 - # 8 Short offline Completed without error 00% 22428 - # 9 Short offline Completed without error 00% 22332 - #10 Short offline Completed without error 00% 22260 - #11 Short offline Completed without error 00% 22164 - #12 Short offline Completed without error 00% 22092 - #13 Short offline Completed without error 00% 21996 - #14 Short offline Completed without error 00% 21924 - #15 Short offline Completed without error 00% 21828 - #16 Short offline Completed without error 00% 21756 - #17 Short offline Completed without error 00% 21660 - #18 Short offline Completed without error 00% 21588 - #19 Short offline Completed without error 00% 21492 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 28/39 Celsius Lifetime Min/Max Temperature: 17/41 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (92) Index Estimated Time Temperature Celsius 93 2019-04-23 18:14 37 ****************** ... ..(126 skipped). .. ****************** 92 2019-04-23 20:21 37 ****************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 54 --- Lifetime Power-On Resets 0x01 0x010 4 23021 --- Power-on Hours 0x01 0x018 6 18585472380 --- Logical Sectors Written 0x01 0x020 6 27340427 --- Number of Write Commands 0x01 0x028 6 65461806928 --- Logical Sectors Read 0x01 0x030 6 302167323 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 23017 --- Spindle Motor Power-on Hours 0x03 0x010 4 23017 --- Head Flying Hours 0x03 0x018 4 54 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 53 --- Read Recovery Attempts 0x03 0x030 4 11 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 37 --- Current Temperature 0x05 0x010 1 36 N-- Average Short Term Temperature 0x05 0x018 1 34 N-- Average Long Term Temperature 0x05 0x020 1 41 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x030 1 38 N-- Highest Average Short Term Temperature 0x05 0x038 1 24 N-- Lowest Average Short Term Temperature 0x05 0x040 1 37 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 10048 --- Number of Hardware Resets 0x06 0x010 4 229 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS
[edit] Non-Raid drives
[edit] Western Digital Drives
Note that the Red line of drives, which WD has advertised as being suitable for Raid/NAS, is now a bit of a minefield. Pre-2020 drives are probably okay for raid, but then WD introduced SMR to your basic Red drive! These are now seriously UNsuitable, but WD also introduced the Red Pro and the Red Plus, which they have confirmed are and will remain CMR for the forseeable future. They are still okay for raid.
[edit] Raid drives
[edit] WD RE4 (Gold?)
[edit] WDC WD1003FBYX-01Y7B1 (1TB)
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE4 Device Model: WDC WD1003FBYX-01Y7B1 Serial Number: WD-WCAW36571293 LU WWN Device Id: 5 0014ee 25e700225 Firmware Version: 01.01V02 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Oct 10 10:13:52 2017 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (16860) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 166) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 174 170 021 - 4283 4 Start_Stop_Count -O--CK 100 100 000 - 37 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 065 065 000 - 25633 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 36 192 Power-Off_Retract_Count -O--CK 200 200 000 - 30 193 Load_Cycle_Count -O--CK 200 200 000 - 6 194 Temperature_Celsius -O---K 119 109 000 - 28 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 25579 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 27/30 Celsius Lifetime Min/Max Temperature: 27/38 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (137) Index Estimated Time Temperature Celsius 108 2017-10-10 09:44 27 ******** 109 2017-10-10 09:45 28 ********* ... ..( 27 skipped). .. ********* 137 2017-10-10 10:13 28 ********* SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 2152921 Vendor specific
[edit] WDC WD2003FYYS-02W0B0 2TB
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE4 Device Model: WDC WD2003FYYS-02W0B0 Serial Number: WD-WMAY01652712 LU WWN Device Id: 5 0014ee 6565a5b8c Firmware Version: 01.01D01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Oct 10 12:02:08 2017 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (28800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 293) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 253 253 021 - 8158 4 Start_Stop_Count -O--CK 100 100 000 - 17 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 060 060 000 - 29700 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 15 192 Power-Off_Retract_Count -O--CK 200 200 000 - 11 193 Load_Cycle_Count -O--CK 200 200 000 - 5 194 Temperature_Celsius -O---K 122 105 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 29646 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 30/34 Celsius Lifetime Min/Max Temperature: 30/47 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (463) Index Estimated Time Temperature Celsius 464 2017-10-10 04:05 30 *********** ... ..(476 skipped). .. *********** 463 2017-10-10 12:02 30 *********** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error
[edit] WD Scorpio Blue
[edit] WDC WD3200BEVS (2007?) 320 GB
smartctl 6.2 2013-11-07 r3856 [x86_64-linux-4.4.76-1-default] (SUSE RPM) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD3200BEVS-26VAT0 Serial Number: WD-WXEY08TNC596 LU WWN Device Id: 5 0014ee 202491e9f Firmware Version: 11.01A11 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 1.5 Gb/s Local Time is: Mon Sep 4 17:45:19 2017 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10380) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 122) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 188 186 021 - 1600 4 Start_Stop_Count -O--CK 087 087 000 - 13483 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 098 098 000 - 1680 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 6965 192 Power-Off_Retract_Count -O--CK 200 200 000 - 95 193 Load_Cycle_Count -O--CK 196 196 000 - 14147 194 Temperature_Celsius -O---K 098 095 000 - 49 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 1 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 3 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 67 61 15 ce 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 28 20 00 e0 15 67 0c ce 61 00 00 00 00:00:51.248 NOP [Reserved subcommand] [OBS-ACS-2] 04 66 2f 15 ce 00 20 00 e0 80 00 00 00 00:23:49.095 [RESERVED] 00 18 80 00 e0 15 67 04 c2 60 00 00 00 00:00:04.097 NOP [Reserved subcommand] [OBS-ACS-2] Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 67 60 15 c2 00 00 00 00 00 00 00 04 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 10 15 67 00 c2 2f 00 00 00 00:00:57.368 NOP [Abort queued commands] 04 63 60 15 b6 00 f8 00 e0 80 00 00 04 00:23:42.947 [RESERVED] 00 e8 20 00 e0 15 25 0c b6 61 00 00 00 00:00:49.392 NOP [Reserved subcommand] [OBS-ACS-2] Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 63 60 15 b6 00 00 00 00 00 00 00 04 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 f0 20 00 c0 15 63 04 b6 60 00 00 00 00:00:57.592 NOP [Reserved subcommand] [OBS-ACS-2] 0c 25 61 15 b6 00 e8 00 e0 20 00 00 0d 00:23:42.885 [RESERVED] 00 d8 03 00 28 15 1d 0d b6 60 00 00 00 00:00:08.416 NOP [Reserved subcommand] [OBS-ACS-2] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 49 Celsius Power Cycle Min/Max Temperature: 37/49 Celsius Lifetime Min/Max Temperature: 37/52 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (124) Index Estimated Time Temperature Celsius 122 2017-09-04 17:43 48 ***************************** 123 2017-09-04 17:44 48 ***************************** 124 2017-09-04 17:45 49 ****************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x8000 4 1213 Vendor specific