Drive Data Sheets

From Linux Raid Wiki
(Difference between revisions)
Jump to: navigation, search
m (→‎Western Digital Drives =)
(Add 3TB Seagate Barracuda)
Line 13: Line 13:
 
=== Non-Raid drives ===
 
=== Non-Raid drives ===
 
Seagate Barracuda
 
Seagate Barracuda
 +
==== ST3000DM001 ====
 +
3 TB (2014)
 +
<pre>
 +
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.4.6-gentoo] (local build)
 +
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
 +
 +
=== START OF INFORMATION SECTION ===
 +
Model Family:    Seagate Barracuda 7200.14 (AF)
 +
Device Model:    ST3000DM001-1CH166
 +
Serial Number:    W1F50K0F
 +
LU WWN Device Id: 5 000c50 0737a98a4
 +
Firmware Version: CC27
 +
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
 +
Sector Sizes:    512 bytes logical, 4096 bytes physical
 +
Rotation Rate:    7200 rpm
 +
Form Factor:      3.5 inches
 +
Device is:        In smartctl database [for details use: -P show]
 +
ATA Version is:  ACS-2, ACS-3 T13/2161-D revision 3b
 +
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
 +
Local Time is:    Mon Sep  4 16:22:19 2017 BST
 +
SMART support is: Available - device has SMART capability.
 +
SMART support is: Enabled
 +
AAM feature is:  Unavailable
 +
APM level is:    128 (minimum power consumption without standby)
 +
Rd look-ahead is: Enabled
 +
Write cache is:  Enabled
 +
ATA Security is:  Disabled, NOT FROZEN [SEC1]
 +
Wt Cache Reorder: Unavailable
 +
 +
=== START OF READ SMART DATA SECTION ===
 +
SMART overall-health self-assessment test result: PASSED
 +
 +
General SMART Values:
 +
Offline data collection status:  (0x00) Offline data collection activity
 +
                                        was never started.
 +
                                        Auto Offline Data Collection: Disabled.
 +
Self-test execution status:      (  0) The previous self-test routine completed
 +
                                        without error or no self-test has ever
 +
                                        been run.
 +
Total time to complete Offline
 +
data collection:                (  592) seconds.
 +
Offline data collection
 +
capabilities:                    (0x73) SMART execute Offline immediate.
 +
                                        Auto Offline data collection on/off support.
 +
                                        Suspend Offline collection upon new
 +
                                        command.
 +
                                        No Offline surface scan supported.
 +
                                        Self-test supported.
 +
                                        Conveyance Self-test supported.
 +
                                        Selective Self-test supported.
 +
SMART capabilities:            (0x0003) Saves SMART data before entering
 +
                                        power-saving mode.
 +
                                        Supports SMART auto save timer.
 +
Error logging capability:        (0x01) Error logging supported.
 +
                                        General Purpose Logging supported.
 +
Short self-test routine
 +
recommended polling time:        (  1) minutes.
 +
Extended self-test routine
 +
recommended polling time:        ( 328) minutes.
 +
Conveyance self-test routine
 +
recommended polling time:        (  2) minutes.
 +
SCT capabilities:              (0x3085) SCT Status supported.
 +
 +
SMART Attributes Data Structure revision number: 10
 +
Vendor Specific SMART Attributes with Thresholds:
 +
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
 +
  1 Raw_Read_Error_Rate    POSR--  115  099  006    -    97112728
 +
  3 Spin_Up_Time            PO----  094  094  000    -    0
 +
  4 Start_Stop_Count        -O--CK  100  100  020    -    260
 +
  5 Reallocated_Sector_Ct  PO--CK  100  100  010    -    0
 +
  7 Seek_Error_Rate        POSR--  076  060  030    -    42637297
 +
  9 Power_On_Hours          -O--CK  085  085  000    -    13787
 +
10 Spin_Retry_Count        PO--C-  100  100  097    -    0
 +
12 Power_Cycle_Count      -O--CK  099  099  020    -    1425
 +
183 Runtime_Bad_Block      -O--CK  100  100  000    -    0
 +
184 End-to-End_Error        -O--CK  100  100  099    -    0
 +
187 Reported_Uncorrect      -O--CK  100  100  000    -    0
 +
188 Command_Timeout        -O--CK  100  100  000    -    0 0 2
 +
189 High_Fly_Writes        -O-RCK  100  100  000    -    0
 +
190 Airflow_Temperature_Cel -O---K  055  049  045    -    45 (Min/Max 28/45)
 +
191 G-Sense_Error_Rate      -O--CK  100  100  000    -    0
 +
192 Power-Off_Retract_Count -O--CK  100  100  000    -    28
 +
193 Load_Cycle_Count        -O--CK  098  098  000    -    5774
 +
194 Temperature_Celsius    -O---K  045  051  000    -    45 (0 14 0 0 0)
 +
197 Current_Pending_Sector  -O--C-  100  100  000    -    0
 +
198 Offline_Uncorrectable  ----C-  100  100  000    -    0
 +
199 UDMA_CRC_Error_Count    -OSRCK  200  200  000    -    0
 +
240 Head_Flying_Hours      ------  100  253  000    -    14253h+26m+59.844s
 +
241 Total_LBAs_Written      ------  100  253  000    -    91787618842
 +
242 Total_LBAs_Read        ------  100  253  000    -    3706183336
 +
                            ||||||_ K auto-keep
 +
                            |||||__ C event count
 +
                            ||||___ R error rate
 +
                            |||____ S speed/performance
 +
                            ||_____ O updated online
 +
                            |______ P prefailure warning
 +
 +
General Purpose Log Directory Version 1
 +
SMART          Log Directory Version 1 [multi-sector log support]
 +
Address    Access  R/W  Size  Description
 +
0x00      GPL,SL  R/O      1  Log Directory
 +
0x01          SL  R/O      1  Summary SMART error log
 +
0x02          SL  R/O      5  Comprehensive SMART error log
 +
0x03      GPL    R/O      5  Ext. Comprehensive SMART error log
 +
0x06          SL  R/O      1  SMART self-test log
 +
0x07      GPL    R/O      1  Extended self-test log
 +
0x09          SL  R/W      1  Selective self-test log
 +
0x10      GPL    R/O      1  SATA NCQ Queued Error log
 +
0x11      GPL    R/O      1  SATA Phy Event Counters log
 +
0x21      GPL    R/O      1  Write stream error log
 +
0x22      GPL    R/O      1  Read stream error log
 +
0x80-0x9f  GPL,SL  R/W    16  Host vendor specific log
 +
0xa1      GPL,SL  VS      20  Device vendor specific log
 +
0xa2      GPL    VS    4496  Device vendor specific log
 +
0xa8      GPL,SL  VS    129  Device vendor specific log
 +
0xa9      GPL,SL  VS      1  Device vendor specific log
 +
0xab      GPL    VS      1  Device vendor specific log
 +
0xb0      GPL    VS    5176  Device vendor specific log
 +
0xbe-0xbf  GPL    VS  65535  Device vendor specific log
 +
0xc0      GPL,SL  VS      1  Device vendor specific log
 +
0xc1      GPL,SL  VS      10  Device vendor specific log
 +
0xc4      GPL,SL  VS      5  Device vendor specific log
 +
0xe0      GPL,SL  R/W      1  SCT Command/Status
 +
0xe1      GPL,SL  R/W      1  SCT Data Transfer
 +
 +
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
 +
No Errors Logged
 +
 +
SMART Extended Self-test Log Version: 1 (1 sectors)
 +
No self-tests have been logged.  [To run self-tests, use: smartctl -t]
 +
 +
SMART Selective self-test log data structure revision number 1
 +
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
 +
    1        0        0  Not_testing
 +
    2        0        0  Not_testing
 +
    3        0        0  Not_testing
 +
    4        0        0  Not_testing
 +
    5        0        0  Not_testing
 +
Selective self-test flags (0x0):
 +
  After scanning selected spans, do NOT read-scan remainder of disk.
 +
If Selective self-test is pending on power-up, resume after 0 minute delay.
 +
 +
SCT Status Version:                  3
 +
SCT Version (vendor specific):      522 (0x020a)
 +
SCT Support Level:                  1
 +
Device State:                        Active (0)
 +
Current Temperature:                    45 Celsius
 +
Power Cycle Min/Max Temperature:    20/45 Celsius
 +
Lifetime    Min/Max Temperature:    13/51 Celsius
 +
Under/Over Temperature Limit Count:  0/0
 +
 +
SCT Data Table command not supported
 +
 +
SCT Error Recovery Control command not supported
 +
 +
Device Statistics (GP/SMART Log 0x04) not supported
 +
 +
SATA Phy Event Counters (GP Log 0x11)
 +
ID      Size    Value  Description
 +
0x000a  2            2  Device-to-host register FISes sent due to a COMRESET
 +
0x0001  2            0  Command failed due to ICRC error
 +
0x0003  2            0  R_ERR response for device-to-host data FIS
 +
0x0004  2            0  R_ERR response for host-to-device data FIS
 +
0x0006  2            0  R_ERR response for device-to-host non-data FIS
 +
0x0007  2            0  R_ERR response for host-to-device non-data FIS
 +
</pre>
  
 
== Toshiba Drives ==
 
== Toshiba Drives ==

Revision as of 15:34, 4 September 2017

This page is meant to contain smartctl information for assorted drives, so people can look and see whether ERC etc is supported. It's quite hard to find out information from marketing information

Contents

Hitachi Drives

Raid drives

Hitachi HGST UltraStar

Non-Raid drives

Seagate drives

Raid drives

Seagate NAS

Seagate Ironwolf

Non-Raid drives

Seagate Barracuda

ST3000DM001

3 TB (2014) 

smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.4.6-gentoo] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST3000DM001-1CH166
Serial Number:    W1F50K0F
LU WWN Device Id: 5 000c50 0737a98a4
Firmware Version: CC27
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Sep  4 16:22:19 2017 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (  592) seconds.
Offline data collection
capabilities:                    (0x73) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 328) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x3085) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   115   099   006    -    97112728
  3 Spin_Up_Time            PO----   094   094   000    -    0
  4 Start_Stop_Count        -O--CK   100   100   020    -    260
  5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    0
  7 Seek_Error_Rate         POSR--   076   060   030    -    42637297
  9 Power_On_Hours          -O--CK   085   085   000    -    13787
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   099   099   020    -    1425
183 Runtime_Bad_Block       -O--CK   100   100   000    -    0
184 End-to-End_Error        -O--CK   100   100   099    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
188 Command_Timeout         -O--CK   100   100   000    -    0 0 2
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   055   049   045    -    45 (Min/Max 28/45)
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    0
192 Power-Off_Retract_Count -O--CK   100   100   000    -    28
193 Load_Cycle_Count        -O--CK   098   098   000    -    5774
194 Temperature_Celsius     -O---K   045   051   000    -    45 (0 14 0 0 0)
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
198 Offline_Uncorrectable   ----C-   100   100   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    0
240 Head_Flying_Hours       ------   100   253   000    -    14253h+26m+59.844s
241 Total_LBAs_Written      ------   100   253   000    -    91787618842
242 Total_LBAs_Read         ------   100   253   000    -    3706183336
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      20  Device vendor specific log
0xa2       GPL     VS    4496  Device vendor specific log
0xa8       GPL,SL  VS     129  Device vendor specific log
0xa9       GPL,SL  VS       1  Device vendor specific log
0xab       GPL     VS       1  Device vendor specific log
0xb0       GPL     VS    5176  Device vendor specific log
0xbe-0xbf  GPL     VS   65535  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL,SL  VS      10  Device vendor specific log
0xc4       GPL,SL  VS       5  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    45 Celsius
Power Cycle Min/Max Temperature:     20/45 Celsius
Lifetime    Min/Max Temperature:     13/51 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Data Table command not supported

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            2  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS

Toshiba Drives

Raid drives

Non-Raid drives

Western Digital Drives

Raid drives

Non-Raid drives

Retrieved from "https://raid.wiki.kernel.org/index.php?title=Drive_Data_Sheets&oldid=5793"
Personal tools