RAID Creation

From Linux Raid Wiki
Revision as of 15:50, 19 September 2013 by Gabriel (Talk | contribs)

Jump to: navigation, search

MD devices are created using the Create mode of mdadm.

You need to specify the raid device to create, the raid mode (raid0, raid1, raid10, raid5, raid6 etc) and the component devices.

You can also configure many aspects of your array:

One question that frequently comes up with linux raid is:

“Why does linux raid do 'resync' when I create a clean array? Can I skip that?”

The answer is usually "NO". For more details see Initial Array Creation

As of lvm2 2.02.87 and linux 2.6.32, LVM can be used to create MD-RAID volumes (lvcreate --type=raidN). This offers a strong guarantee that the component devices won't be exposed.

Personal tools